Panel Builder System Integrator

Sept 5, 2019

EIN 37 CS women in trades 400The Canadian Apprenticeship Forum-Forum Canadien sur l’Apprentissage (CAF-FCA) has announced a task force to develop a national strategy for women in trades.

“Our country is going to need thousands of new trades professionals in the next five years, and the creation of a national strategy to help attract more women to the trades will be critical to meeting labour market and economic needs,” says Shelley Gray, CEO of BC’s Industry Training Authority, and member of the new task force. “To do this, it’s important to develop workplaces that are welcoming, positive, and inclusive of everyone interested in pursuing an apprenticeship.”

The task force is a product of CAF-FCA’s 2019 Supporting Women in Trades Conference. With their initial conference in 2018 they developed their Road Map to Supporting Women in Trades report.

“We already know what the barriers are. Insights from this task force, along with twenty years of CAF-FCA national research in the area will provide a clear direction on how to create sustainable change. The entire skilled trades community needs to work together and set targets for increasing female participation – what gets measured gets done,” said CAF-FCA Executive Director, France Daviault.

The task force, comprised of apprentices, tradeswomen, representatives from women’s organizations, labour groups, employers, educators and jurisdictional apprenticeship authorities will inform specific strategy content and establish a national target to increase participation and retention of females in skilled trades careers.

Ultimately, the goal is to shift the narrative when it comes to women and trades to address gender disparity as well as support the growing demand for tradespeople. Daviault said currently, trades are not presented to women as a viable career option. Getting more women into upper-level positions is crucial for the progression of industry.

"It's typically been seen as careers that are dirty and that require a lot of physical exertion and all of those image barriers that we have. But with the new technologies that are affecting these trades, there is so much opportunity for women," she said in an interview with the Calgary Eyeopener.

The CAF-FCA Strategy task force will hold its inaugural meeting on September 9, 2019. The task force will present their National Strategy for Women in Trades report at the 2020 National Apprenticeship conference to be held in Calgary May 24-26.

Source

PB 25 Phoenix ControlCabinet 400

Phoenix Contact will provide you with support as your reliable partner in the optimization of your processes in control cabinet manufacturing.

Phoenix Contact provides you with holistic solutions in a cooperative partnership, based on their products, services, and experience. Digital data is used consistently, processes optimized, and time saved. The PROJECT complete planning and marking software supports your entire control cabinet manufacturing process. The program provides you with an intuitive user interface that enables you to individually plan, automatically check, and order terminal strips.

Thanks to optimized interfaces, you can easily integrate data from common CAE systems. This enables you to save significant amounts of time in the overall engineering process. Read More


 Like many cyclical industries, mining is reviving, driven by steady global economic growth and an increasing demand for materials to support new technologies like electric vehicles, renewable energy and mobile devices. Despite the optimism, the industry still faces major operational challenges including process efficiencies, cost control, worker health and safety, and skills gaps. To address these challenges, Rockwell Automation introduced The Connected Mine, leveraging the latest enabling and digital technologies.

Utilizing advanced analytics, The Connected Mine helps mining companies collect and aggregate data to gain end-to-end visibility into their operations and make informed business decisions to improve mining operations.

Read More

Latest Articles

  • Prev
For the fourth year in a row, Manufacturers Automation Inc. has been awarded the “Outstanding ...
  Flexibility and rapid production are two of the main demands placed on panel building and ...
  In this issue of Industry Insights with Owen we discuss factory automation ...
Allied Electronics & Automation is announcing the expansion of its current Sales organization. ...
The International Society of Automation (ISA) announced today the first Founding Members of its new ...
Canada continues to be an excellent performer for HARTING, recording double digit revenue growth on ...
  With the growth of e-Commerce, comes major changes in global retail and logistics. ...
This June the Pepperl+Fuchs road tour made its way through Ontario and Quebec, visiting several ...
  What do NBA sportsmen like the world champions from Toronto, The Raptors, and the ...
  In this issue of Industry Insights with Owen I had the privilege of asking ...

PB 25 Rittal MarineWaves 400For almost a half a century Canal Marine & Industrial of St Catharines, Ontario has provided electrical design, engineering and services around the clock to the merchant marine, naval and coastguard fleets in Canada and the rest of the World. In recent years, Canal has become a leader in the design and supply of marine hybrid power and propulsion systems. These systems utilize alternative methods for supporting propulsion and the vessel’s electrical power plant, so that fuel consumption and emissions are reduced.

Great Lakes Towing of Cleveland, Ohio (popularly called “The Towing Company”) operates the largest and most experienced U.S.-flag tugboat fleet. The Towing Company is a significant marine operations link in North America’s U.S. Great Lakes-Saint Lawrence Seaway marine transportation network, the fourth seacoast of the United States, an operating area that extends over 8,300 miles of shoreline, encompassing a water surface area of roughly 100,000 square miles. Read More

HARTING Electronics: Circular Connectors – A Round Thing

Circular Connectors 400

Jonas Diekmann, Technical Editor at HARTING Electronics

The metric system of units was introduced for the first time in 1793 during the French Revolution and is used even today in almost all countries worldwide. The metric round plug connectors are also based on this system of units and are a known standard in raw industrial applications. In various diameters and codes, they are a reliable connection for the three lifelines of industrial applications. Data, signals and performance are essential for drive, control and communication. The typical round appearance with the thread for screwing in is a success story up to the present. But classics often also still reveal unexpected potential. With its new PushPull Locking and Com-Lock HARTING is making two round guild models ready for the future.

Metric round plug connectors are some of the most widespread interfaces worldwide, when it comes to cabling for machines, industrial plant and devices under demanding conditions of use.

Read More

Rockwell SleemanTen years ago, tourists looking for a taste of the local life in Southern Canada may have asked for one of the region’s best wines. Today, it’s all about craft beer.

From entrepreneurial newcomers to large-scale producers, brewers in Canada are cashing in on the thirst for craft beer. The number of microbreweries – ­producing less than 25,000 cases of 24 – has more than doubled in the last seven years.

The explosion in craft beer popularity had one company – Sleeman Breweries – bursting at its production seams. The third-largest brewer in Canada, Sleeman brews and distributes popular beers from lagers to pale ales.

 Read More

 

Coming Soon: The new EPLAN Pro Panel, Version 2.8, Virtual control cabinet engineering – fully matured

The new EPLAN Pro Panel, Version 2.8 is making its first big appearance at the SPS IPC Drives. The software for virtual 3D control cabinet engineering is characterised by its expanded flexibility, surprising users with a brand new 4K-capable user interface. It’s also causing decision-makers to sit up and take notice: during live, joint presentations in Nuremberg, EPLAN and Rittal will be introducing a whole series of innovations in the context of control cabinet engineering.

These include complementary software solutions for engineering and preplanning operations, innovative system technology for housings, power distribution and climate-control systems, automation technologies, and digital assistance systems for integrated automation of manufacturing processes. EPLAN and Rittal are thereby positioning themselves as solutions providers offering integrated solutions for optimising processes in control cabinet engineering: combined machine/hardware and software solutions, product-accompanying data and comprehensive on-site process integration services for customers.

Read More: < ...

Product News

  • Prev
Emerson recently announced the expansion of the Greenlee carbide-tipped hole cutter.  This ...
AttaBox NewSentry series thermoplastic PVC (Polyvinyl Chloride) junction boxes are extremely rugged ...
The wind industry is streamlining its global manufacturing and installation processes to boost ...
Non-contact EchoPod and EchoTouch reflective ultrasonic liquid level sensors feature ...
POSITAL’s new multiturn Hollow Shaft kit encoders mark a significant innovation for ...
Continuous data flow ensures transparency in the product development process and allows ...
Inductive proximity sensors are the preferred choice for the majority of applications ...
The bus controller makes it possible to connect X2X Link I/O nodes to POWERLINK. It is also ...
Balluff’s U-890 Ultra High Frequency (UHF) handheld RFID reader simplifies mobile data ...
Pfannenberg, a leading global manufacturer of thermal management technologies, highlights ...
Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2019 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil