NSI Industries Introduces UL Listed Power Distribution Blocks for Safe and Easy Electrical Connections, Expanding its Product Portfolio

August 2, 2019

NSI Industries, LLC recently announced the introduction of the NPDB Series of Power Distribution Blocks (PDBs), providing a safe, convenient way of splicing and tapping power conductors.

The comprehensive series of 26 products are designed for short circuit current rating (SCCR) applications up to 100,000 amperages (100 kA) when properly fused. UL Listed to UL1953 and UL1059 (cULus), the NPDB Series offers a variety of line side (primary) and load side (secondary) port configurations. The family also features dual-rated, 90 degrees Celsius (AL9CU) ports, accepting copper or aluminum conductors, providing a greater flexibility in control panel wiring and wire management.

“Power Distribution Blocks marked with a higher SCCR that are equipped with finger-safe protection covers and DIN Rail mountable are quickly becoming the standard for power distribution blocks in all kinds of control panel applications,” said David DiDonato, chief operating officer, NSI Industries. “With up to 100 kA, our new NPDB Series meets NEC requirements and can replace lower-rated PDBs (10 kA) to help achieve higher control panel SCCRs. The NPDB product line compliments our current contractor-friendly Connector Blok™ Series, meeting the needs for most any application.”

The single-pole NPDB Series features a modular design that allows for installation on a standard 35mm DIN rail or through provided mounting holes. A locking mechanism secures the block to the rail. Providing protection against electrical shock, the finger-safe SCCR series is available in three sizes (small, medium and large) and are rated up to 600 volts with current-carrying capability of up to 840 amps per pole. Each unit ships complete with finger protection covers and end caps.

The NPDB Series’ SCCR helps achieve NEC® and OSHA requirements and are UL 1953 Listed, UL1509 Listed (cULus) and IP20 finger-safe per IEC 60529.

For additional information on NSI Industries’ NPDB Series of PDBs or other products, visit www.nsiindustries.com or find additional information in the brochure.

Related Articles

HPS Power Quality Products

HPS Power Quality Products

Janaury 26, 2023 Good power quality is important to maintain critical operations, improve energy efficiency and prevent premature equipment failure. Examples of poor power quality include harmonic distortion, reflected wave voltage, and low power factor. HPS products include active harmonic filters, passive harmonic filters, dV/dT filters, line and load reactors, drive isolation transformers, harmonic mitigating…

Changing Scene

  • François Tellier Appointed as East Managing Partner of EY Canada

    François Tellier Appointed as East Managing Partner of EY Canada

    EY Canada is pleased to announce the appointment of François Tellier as the new Managing Partner of Eastern Canada and the Office Managing Partner for Montréal. Tellier takes the reigns from Anne-Marie Hubert who will be retiring effective July 1, 2024. “We’re confident that François’ leadership, experience and strategic vision will further strengthen our presence… Read More…

  • True North Solutions Promotes Amanda Reitenbach to Director of Project Services

    True North Solutions Promotes Amanda Reitenbach to Director of Project Services

    Recently, True North Solutions was proud to announce Amanda Reitenbach’s promotion to the position of Director of Project Services. In this role, Amanda will be responsible for leading, guiding, and coaching program managers and project managers. She will oversee True North’s Project Management Office (PMO), project planning, executions, and resource allocation; facilitate stakeholder communication and… Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Omron’ Advanced Safety Services 101

    Omron’ Advanced Safety Services 101

    In any industrial setting, safety is of the utmost importance. Omron offers Advanced Safety Services to help you and your staff navigate the challenges of complex industry standards and compliance regulations. They also can provide machine safety technology to protect your people and equipment while maximizing productivity. Did you know that Omron’s safety training and… Read More…

  • Become a More Sustainable Industrial Organization

    Become a More Sustainable Industrial Organization

    If you’re looking for ways to become a more sustainable industrial organization this year, 98% of manufacturers are thinking the same thing. They are working towards implementing sustainability systems and solutions in their own organizations. As you work towards becoming a more sustainable industrial organization, you’re probably preparing for new mandates that regulatory bodies will… Read More…