Schneider Electric Introduces High-efficiency 30kW InRow Data Center Cooling Solution to Support Increasing Power Densities

30kw InRow Data Centre 400

May 7, 2019

Schneider Electric recently announced the expansion of its EcoStruxure Ready cooling portfolio, with the introduction of a 30kW InRow DX solution. Available in a 300mm rack format, this data center cooling solution offers industry leading efficiency and addresses the increasing demand for higher density cooling in the data center.    

The trend toward modernization and consolidation of data centers is driving the need for a cooling solution that provides more cooling capacity in a smaller footprint and flexible capacity to adapt to the actual data center load. The 30kW InRow DX is ideal for data centers that are being modernized or retrofitted, or anywhere IT space is at a premium. Due to its powerfully compact size and energy efficient design, the InRow DX is the most versatile and predictable cooling system for next generation small and medium data centers and an optimal choice for edge and enterprise environments.

The 30kW InRow DX offers numerous benefits including:

  • Cooling density: provides up to 3x more capacity compared to previous models, meaning fewer units are needed, freeing up more floor space for IT equipment.
  • High efficiency: uses energy efficient compressor and fans to reduce OpEx and make more power available for other IT equipment.
  • Flexible design: easily addresses common installation constraints and reduces service requirements inside the white space.
  • Variable capacity: Variable Speed Drive compressor allows you to adapt cooling load to the actual thermal demand.
  • Cost Savings: leveraging the low amps of the unit to deliver electrical CapEx reduction.
  • EcoStruxure™ Ready: easy to manage with global visibility of equipment performance and status supported with a 24/7 expert service bureau.

“If you are consolidating, modernizing, or expanding your data center and struggling to manage the heat profile introduced by the new servers, the versatile new 30kW InRow DX is ideal,” said Ben Smith, Vice President of Cooling, Schneider Electric. “Powerfully compact and with unmatched efficiency, the 30kW InRow allows for fewer units to provide the same amount of cooling capacity.”

Click HERE to find out more about the 30kW InRow DX and Schneider Electric’s complete line of cooling solutions.

Related Articles

OnRobot Launches Low Cost, Easy to Use 2FG7 Gripper for Demanding Applications

OnRobot Launches Low Cost, Easy to Use 2FG7 Gripper for Demanding Applications

OnRobot has launched the 2FG7, a complete, low cost, easy to use, out-of-the-box, cleanroom-ready parallel gripper. Designed to enable companies of all sizes to set up gripping applications at low cost, the 2FG7 can be deployed within minutes and is specially designed to handle demanding payloads –even in tight spaces.

 

 

 

Brighter, More Flexible Tower Light Now Available from Rockwell Automation

Brighter, More Flexible Tower Light Now Available from Rockwell Automation

 

Rockwell Automation introduces the Allen-Bradley ControlTower 856T 70 mm Tower Light system. This new system incorporates brighter LED illumination and a broad offering of visual and sound technologies all in a 70 mm diameter housing. The ControlTower 856T is capable of accommodating up to seven modules in the same stack, offering users the ability to monitor more machine and process conditions in a single device.

 

 

Mouser Electronics: MEAN WELL Peak Power Switching Power Supplies

Mouser Electronics: MEAN WELL Peak Power Switching Power Supplies

MEAN WELL Peak Power Switching Power Supplies feature the LRS-N2, HRPG-1000N3, and HRP-150N3/300N3/600N3 series power supplies with a large 200% to 350% peak power capability. The peak power family offers a universal AC input (85VAC to 264VAC) and a 1U low-profile design. MEAN WELL Peak Power Switching Power Supplies operate up to +70°C and provide various protections against overload, overvoltage, overtemperature, and short-circuiting.

Wieland: Robust Ethernet Switch for Use in the Field

Wieland: Robust Ethernet Switch for Use in the Field

The new IP67 ethernet switch from Wieland Electric enables reliable operation in harsh industrial and other environmental conditions. Industrial automation is increasingly relying on the decentralized and flexible connection of automation components. This also applies to IP or ethernet switches, which are no longer only mounted in the control cabinet, but also directly on the machine. In order to ensure the reliable operation of the network components under these circumstances, the devices must meet the requirements of harsher working environments.

Greater Sensing Distance Ultrasonic Proximity Sensors from AutomationDirect

Greater Sensing Distance Ultrasonic Proximity Sensors from AutomationDirect

SU, UK, UT and TU series round body and UQ series cubic plastic ultrasonic distance sensors from AutomationDirect are now available in sensing distance ranges from 60mm to 8000mm, in metal or plastic housings, and M18 (18mm) and M30 (30mm) barrel or head sizes. Discrete and analog output sensors and models with both analog and discrete switching outputs are available.

 

 

 

Changing Scene

  • François Tellier Appointed as East Managing Partner of EY Canada

    François Tellier Appointed as East Managing Partner of EY Canada

    EY Canada is pleased to announce the appointment of François Tellier as the new Managing Partner of Eastern Canada and the Office Managing Partner for Montréal. Tellier takes the reigns from Anne-Marie Hubert who will be retiring effective July 1, 2024. “We’re confident that François’ leadership, experience and strategic vision will further strengthen our presence… Read More…

  • True North Solutions Promotes Amanda Reitenbach to Director of Project Services

    True North Solutions Promotes Amanda Reitenbach to Director of Project Services

    Recently, True North Solutions was proud to announce Amanda Reitenbach’s promotion to the position of Director of Project Services. In this role, Amanda will be responsible for leading, guiding, and coaching program managers and project managers. She will oversee True North’s Project Management Office (PMO), project planning, executions, and resource allocation; facilitate stakeholder communication and… Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Omron’ Advanced Safety Services 101

    Omron’ Advanced Safety Services 101

    In any industrial setting, safety is of the utmost importance. Omron offers Advanced Safety Services to help you and your staff navigate the challenges of complex industry standards and compliance regulations. They also can provide machine safety technology to protect your people and equipment while maximizing productivity. Did you know that Omron’s safety training and… Read More…

  • Become a More Sustainable Industrial Organization

    Become a More Sustainable Industrial Organization

    If you’re looking for ways to become a more sustainable industrial organization this year, 98% of manufacturers are thinking the same thing. They are working towards implementing sustainability systems and solutions in their own organizations. As you work towards becoming a more sustainable industrial organization, you’re probably preparing for new mandates that regulatory bodies will… Read More…