Pilz: Clearing The Way For Cylinder Production

Pilz Cylinder Technology Thumbnail

September 21, 2021

54 plants are to be modernised, to upgrade Vaillant’s production of hot water storage cylinders to state-of-the-art electrical and safety technology. The safety design for cylinder production was to incorporate a barrier-free solution for two older production lines, combining safety with efficiency. The loading and unloading area presented a challenge, as it was to be free of any disruptive structures.

Safety that’s almost artistic

On the basis of the hazard assessment Pilz developed an unusual safety solution using the light curtains PSENopt II. The individual positioners are accessible from three sides and secure cylinders of various sizes, which are fed in manually and via crane. Pilz supported the modernisation process in a spirit of partnership, from the hazard assessment, safety concept and safety design through to system implementation. The solution was found during a joint workshop: the light curtains PSENopt II were tilted ninety degrees, the transmitter was embedded horizontally into the floor and the receivers were installed on the ceiling. That way it was possible tor the exchange between human and machine to be free from barriers, without compromising safety. The safe configurable small controller PNOZmulti 2 manages all the safety-related signals. Should a plant operator interrupt the light beams transmitted from the floor or step on one of the upstream pressure-sensitive mats, PNOZmulti 2 will trigger an immediate safe stop of the hazardous movement – with no barriers in sight!

The benefits at a glance

Allows older production lines to be operated safely and in compliance with the standards for further years to come

Barrier-free safety solution offers higher productivity and greater freedom of movement for operators

Based on the configurable small controller PNOZmulti 2, expansion modules can be used to extend the system individually

Source

Related Articles


Changing Scene

  • True North Solutions Promotes Amanda Reitenbach to Director of Project Services

    True North Solutions Promotes Amanda Reitenbach to Director of Project Services

    Recently, True North Solutions was proud to announce Amanda Reitenbach’s promotion to the position of Director of Project Services. In this role, Amanda will be responsible for leading, guiding, and coaching program managers and project managers. She will oversee True North’s Project Management Office (PMO), project planning, executions, and resource allocation; facilitate stakeholder communication and… Read More…

  • Tarak Mehta to Leave ABB

    Tarak Mehta to Leave ABB

    ABB has recently announced that Tarak Mehta, President Motion Business Area and Member of the Executive Committee, has decided to leave ABB since he has accepted the role as CEO of another company. Tarak will leave ABB at the end of July this year. Tarak joined ABB in 1998 and has since then held a… Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Become a More Sustainable Industrial Organization

    Become a More Sustainable Industrial Organization

    If you’re looking for ways to become a more sustainable industrial organization this year, 98% of manufacturers are thinking the same thing. They are working towards implementing sustainability systems and solutions in their own organizations. As you work towards becoming a more sustainable industrial organization, you’re probably preparing for new mandates that regulatory bodies will… Read More…

  • Artificial Intelligence (AI) Integrates with Cobots and AMRs Making them Smarter

    Artificial Intelligence (AI) Integrates with Cobots and AMRs Making them Smarter

    By Krystie Johnston – Robot technology is becoming increasingly accessible for companies of all sizes across a wide range of industries. Accelerated computing and the ever-evolving contribution of artificial intelligence or AI are transforming virtually everything – robots and robot technology included. Teradyne Robotics, a global leader in advanced automation solutions and parent company to… Read More…