Wind Energy is Key to Ontario’s Long Term Energy Plan

CANwea

Glenn Thibeault, Ontario’s Minister of Energy, has released the updated Long-Term Energy Plan (LTEP), Delivering Fairness and Choice. As part of this plan, the LTEP remains committed to achieving Ontario’s climate goals and forecasts heightened need for electricity supply in the coming years to support the transition to a low-carbon economy. Ontario will need renewable energy, like wind energy, and more of it, if it is to meet greenhouse gas emission targets moving forward. New wind energy provides the best value for consumers to meet growing demand for affordable non-emitting electricity.

The LTEP lays out expectations for energy supply and demand and reflects upon changing consumer demands. It notes that investment in the electricity market has improved reliability and reduced emissions. It also comments on how securing wind power has changed over time, noting that “the introduction of the Large Renewable Procurement (LRP) process in 2014 resulted in strong competition between developers of large renewable projects. This significantly reduced the costs of wind and solar energy, saving money for electricity ratepayers.” This improved process resulted in an average 20-year procurement price of 8.45 cents per kilowatt hour (kWh), which was less than the average cost of generation, and enabled increased participation and support from host communities and Indigenous groups.

Wind energy has become one of the lowest cost sources of new electricity generation in Ontario, and while wind power has helped reduce greenhouse gas (GHG) emissions in Ontario’s electricity sector from 34.5 megatonnes of carbon dioxide equivalent (CO2e) in 2005 to 7.1 megatonnes CO2e in 2015, more work needs to be done.

Ontario will need more electricity supply before 2024 (see graphic below). Over the next decade as much as 20 gigawatts (GW) of electricity supply will be removed from the system, representing close to half of all supply in the province. This includes approximately 3 GW of supply coming off-line at Pickering Nuclear Generating Station (NGS), as well as 9 GW of expiring generation contracts. Wind energy will be needed to help fill this supply gap.

CanWEA has long supported that new supply needs in Ontario be competitively sought from affordable, non-emitting generation to maintain low greenhouse gas emissions in the electricity sector in the medium- to long-term while keeping costs in check. Ontarians also realize that climate change is real, and that we need to work together to ensure that emissions from the energy sector continue to be reduced, not increased.

CanWEA and the wind energy industry will continue to work with the Independent Electricity System Operator (IESO) on the implementation of the LTEP.  We pledge to also collaborate with the IESO through the Market Renewal Program to enable affordable, non-greenhouse gas emitting generation.

https://canwea.ca/news-release/2017/10/26/wind-industry-points-expanded-role-renewable-energy-ontarios-long-term-energy-plan/

Related Articles


Changing Scene

  • Weidmüller Canada Is Growing Their Team & Investing in the Future of Engineering

    Weidmüller Canada Is Growing Their Team & Investing in the Future of Engineering

    Weidmüller Canada is growing their team and investing in the future of engineering. They are proud to welcome Ada Santavy, Laura Cochrane, and William Watson, the newest hires of Weidmüller’s Engineering Launchpad Program, an innovative initiative that combines technical and soft skills training, mentorship from industry veterans, and hands-on project experience to develop well-rounded engineering… Read More…

  • Leviton Canada Announces Jim Hartery as New Territory Manager, Alberta

    Leviton Canada Announces Jim Hartery as New Territory Manager, Alberta

    Please join Leviton Canada in welcoming Jim Hartery to their team! Jim brings extensive experience in sales and account management within the electrical industry, along with a proven track record of building strong customer relationships, developing new business opportunities, and driving growth across both new and existing accounts. Leviton is thrilled to have Jim on… Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Texcan: Teck, Vertical Riser & AIRGUARD – Cable Solutions for Demanding Environments

    Texcan: Teck, Vertical Riser & AIRGUARD – Cable Solutions for Demanding Environments

    Teck, Vertical Riser Teck, and AIRGUARD address distinct installation needs for industrial and vertical‑riser installations. Each product targets specific installation needs: Teck for general industrial feeders, Vertical Riser Teck for continuous vertical runs, and AIRGUARD to deliver high crush resistance and corrosion protection on long runs. Understanding the differences in application can help ensure the right cable is selected for the… Read More…

  • Mouser: Industrial Ethernet vs Fieldbus – Architecture, TSN & Migration

    Mouser: Industrial Ethernet vs Fieldbus – Architecture, TSN & Migration

    Fieldbuses once replaced bundles of wiring with shared, deterministic networks. For years, they carried control signals reliably and predictably. However, as equipment, sensors, and data systems proliferated, fieldbus limitations emerged. The central issue today is real-time operational visibility. Engineers need networks that move control data, diagnostics, and process information across the plant as reliably as… Read More…