| | | | | | | | |

Murrelektronik: Modlight60 Pro-RGB Signal Tower with Buzzer Module, IO-Link, Connection M12 4-Pole

Murrelektronik Modlight60 Pro-RGB Multifunctional Signal Tower with Buzzer Module, IO-Link

August 7, 2025

Modlight60 Pro-RGB IO-Link Signal Tower: An Adjustable, Versatile & Cost-Effective Signal Solution

The Modlight60 Pro-RGB IO-Link signal tower is a versatile, cost-effective solution for applications requiring a stack light. With 20 RGB LED slices, 21 adjustable colors and 10 different light patterns, it offers a wide range of clear and eye-catching signaling options. The LED brightness is adjustable and there is an eco-mode that reduces brightness by 50 percent to increase energy efficiency. By selecting the version with a buzzer, which offers 8 different tones, you can also incorporate individual acoustic signals where needed. The 2 different IODDs enable individual control of the RGB LED slices (colors, light patterns, and animations) via process data.

Specifications

Electrical Data | Supply

Operating voltage typeDC
Operating voltage DC24 V
Operating voltage DC min.18 V
Operating voltage DC max.30 V
Current consumption250 mA
Current consumption max.300 mA
Additional condition current consumptionAt operating voltage with IO-Link communication

Industrial Communication | IO-Link

IO-Link typeDevice
Port ClassA
IO-Link revision IDV1.1.3
IO-Link transmission rateCOM2 (38.4 kbit/s)
Vendor ID0x12F (303)
Device ID (delivery status, decimal)1,048,579
IO-Link process data length input (delivery status)2 Bytes
IO-Link process data length output (delivery status)8 Bytes
IO-Link cycle time min. (delivery status)49 ms
Device ID (decimal)1,048,580
IO-Link process data length input2 Bytes
IO-Link process data length output24 Bytes
IO-Link cycle time min.10 ms
IO-Link SIO-ModeYes

HMI

Buzzer volume min.0 %
Buzzer volume max.100 %
Buzzer volume steps10 %
Sound pressure at 1 m88 dB

HMI | Illumination Properties

Type of illuminantLED
Type of LED controlIO-Link
Number of operation modes3
Number of lighting colors21
Number of lighting patterns10
Dimming setting min.0 %
Dimming setting max.100 %
Continous lightYes
Blink-lightYes
Blinking frequency120, 30, 90
Flash lightYes
Flashing frequency120, 60, 90
Luminous intensity red2,020 mcd
Luminous intensity yellow3,740 mcd
Luminous intensity green6,230 mcd
Luminous intensity blue2,200 mcd
Luminous intensity white3,740 mcd

Environmental Characteristics | Climatic

Ambient temperature min.-20 °C
Ambient temperature max.50 °C
Storage temperature min.-30 °C
Storage temperature max.60 °C
Relative humidity max. (operation)90 % no condensation
Relative humidity max. (storage, transport)90 %
Assembly locationInterior

Approvals

ULE172109
cULCSA C22.2 No. 14
FCC Part 15 Subpart BClass A
ICES-003Class A
Murrelektronik Modlight60 Pro-RGB Multifunctional Signal Tower with Buzzer Module, IO-Link

Source

Modlight60 Pro

Related Articles

Changing Scene

  • Laurentide Controls Chooses Bécancour for Its 6th Centre

    Laurentide Controls Chooses Bécancour for Its 6th Centre

    With more than 50 years of industrial optimization experience in Eastern Canada, Laurentide Controls is officially opening its 6th centre, located in Bécancour. The objective is clear: bring expertise closer to industrial plants, speed up interventions, and generate measurable gains in reliability, productivity and energy performance – all directly benefiting businesses in the region and,… Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Convergix: 4 Ways Factory Automation Improves Supply Chain Management

    Convergix: 4 Ways Factory Automation Improves Supply Chain Management

    Although the disruptions caused by the Covid-19 pandemic revealed the fragility of global supply chains, factory automation has stepped up to mitigate many of those shortcomings. Since the onset of the Covid-19 pandemic, manufacturers worldwide have become acutely aware of the interconnectivity of supply chains. More recent issues such as international trade disputes and labor… Read More…

  • Panduit: A Brief Evolution of Field-Terminated Fiber Connectors

    Panduit: A Brief Evolution of Field-Terminated Fiber Connectors

    Field termination of fiber optic cable connectors is nothing new, and while there have been various products to address field termination needs over the decades, the products discussed here are: field polish, mechanical splice, and fusion splice. Each of these has had time in the spotlight, and there are commonalities that hold true across all three. Chief… Read More…