| | | |

Johnson Controls: YORK YHAU-CG-CA-CXR Double Effect Direct Fired Chiller/Heaters

Johnson Controls YORK YHAU-CGCA-CXR Double Effect Direct Fired Chiller Heaters YHAU-CG-CA-CXR

April 22, 2026

YHAU-CG-CA-CXR Double Effect Direct Fired Chiller/Heaters: The Flexible Solution for Everyday Applications

YORK YHAU-CG-CA-CXR Double-effect, Direct-fired Absorption Chillers/Heaters are driven by waste heat and low-cost heat to deliver highly efficient performance in a space-efficient design. The modular configuration allows multiple units to be arranged in a variety of footprints to fit different space requirements. And for easy building management system (BMS) integration, this unit comes with controls based on programmable logic controller (PLC) and industry-standard MODBUS connectivity.

Benefits

  • Flexible Design: Featuring a compact footprint and modular design, this unit is an ideal solution for high-performance cooling and heating in tight spaces.
  • Optimal Efficiency: This unit has a coefficient of performance of 1.23 with a turndown ratio from 100% to 25% at different temperatures.
  • Trusted Reliability: World-class engineering and proven controls for easy BMS integration simplify operation and reduce unplanned maintenance downtime.

Features

  • Low noise level of 80 dbA.
  • Coefficient of performance (COP) of 1.23 based on lower heating value (LHV) with a turndown ratio from 100% to 25%.
  • Controls based on PLC and industry-standard MODBUS connectivity for easy BMS integration.
  • The space-efficient design of the unit simplifies installation through forklift loading or via an emergency/service elevator.
  • Ambient temperature range of 5°C/41°F to 40°C/104°F with 10-90% relative humidity.
  • Modular configuration allows multiple units to be arranged in a variety of footprints to fit different space requirements.
  • Completely packaged and insulated from the factory with an easy-access enclosure, making the unit suitable for outdoor installations.

Higher System Efficiency

If saving energy and reducing emissions are the goals of an organization, the YORK YHAU-CG-CA-CXR is an ideal choice. This unit uses best-in-class burner combustion technology matched to a high-temperature generator furnace design that enhances system efficiency. It’s a perfect match for comfort cooling applications with low noise levels. The unit has a COP of 1.23 (LHV basis) with a turndown ratio from 100% to 25% at different entering condenser water temperatures.

Johnson Controls YORK YHAU-CGCA-CXR Double Effect Direct Fired Chiller Heaters 1 YHAU-CG-CA-CXR

Modular Configuration

The modular configuration of the YHAU-CG/CA-CXR allows multiple units to be arranged in a variety of footprints to fit different space requirements. This unique design feature also means it’s possible to incrementally increase capacity as buildings are constructed or spaces become occupied.

Johnson Controls YORK YHAU-CGCA-CXR Double Effect Direct Fired Chiller Heaters YHAU-CG-CA-CXR

For more information on Johnson Controls solutions HERE

For more information on YORK solutions HERE

Johnson Controls YORK YHAU-CGCA-CXR Double Effect Direct Fired ChillerHeaters

Source

YHAU-CG-CA-CXR

Related Articles

Changing Scene

  • New Appointments Announced for Rexel & Nedco Canada

    New Appointments Announced for Rexel & Nedco Canada

    Jeffrey Moyle, CEO at Rexel Canada has announced that Ramy Yousif will be stepping into the role of President of Nedco Canada, effective Wednesday, April 22, 2026. This appointment follows Rexel’s recent announcement regarding the acquisition of Groupe Techno-Contact and the creation of the new Rexel Canada Services banner. As Nathalie Parisel transitions from her… Read More…

  • EB Horsman Announces the Appointment of Travis Cook as New Area Manager for Northern Alberta

    EB Horsman Announces the Appointment of Travis Cook as New Area Manager for Northern Alberta

    EB Horsman is excited to announce that Travis Cook has been promoted to Area Manager, Northern Alberta, where he will provide leadership and strategic oversight across their Edmonton branch as well as their new Grande Prairie location, effective April 15th, 2026. Since joining EB Horsman in 2023, Travis has been a driving force behind the success… Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Intertek: ETL Recognized Component Certification

    Intertek: ETL Recognized Component Certification

    Every reliable electrical product begins with trusted parts. Intertek’s ETL Recognized Component certification helps manufacturers verify the safety and suitability of the electrical components and subassemblies used inside their end products, from power supplies and wiring to PCBs, plastics, and insulation systems. Every reliable electrical product begins with trusted parts. Intertek’s ETL Recognized Component certification… Read More…

  • Brady: Labeling Cables & Wires

    Brady: Labeling Cables & Wires

    Labeling cables and wires is a critical component in the identification, assembly, and repair of electrical control panels, wire harnesses, and data/ telecommunications systems. It is an upfront cost that saves time and labor expenses when changes or repairs need to occur to the systems you work on. After following the appropriate wire color codes, there… Read More…