Slim Ethernet IO Modules and Powerful I/O Hubs Complete the Range of Standardized Fieldbus Modules

May 16, 2019

Ethernet IO modules with integrated IO-Link master enable communication, diagnostics, and parameterization from the control system to the sensor level. I/O hubs can also be connected to an IO-Link master that allows binary sensors and actuators to be flexibly integrated into an intelligent IO-Link system.

To meet the different requirements of a wide range of applications and ambient conditions, Pepperl+Fuchs has developed two new products in the field of industrial communication: Ethernet IO modules in a slim housing design and high-performance I/O hubs. These complete the portfolio of standardized fieldbus modules by paving the way for transparent data exchange via IO-Link and offering users more freedom in system planning.

Slim Ethernet IO Modules for Limited Space

Designed for applications with limited installation space, the new Ethernet IO modules with IO-Link master are only 30 mm wide. The integrated L-coded 16 A plug transfers more power than conventional plugs, making it possible to connect several modules while reducing wiring time.Like their 60 mm-wide predecessors, the new modules are especially rugged and designed for cold starts in temperatures as low as -40 °C. The Ethernet IO modules have an IP69 rating and a durable molded metal housing that create the best conditions for use in demanding environments.

High-Performance I/O Hubs with Six Outputs

I/O hubs support mixed operation of IO-Link devices and standard binary sensors/actuators in a single IO-Link system. This makes technological restrictions a thing of the past and gives users absolute freedom during plant design.In combination with the 8-port IO-Link master, I/O hubs not only make it possible to transfer up to 128 digital I/Osto the higher-level control system; the new development also features outputs that can be connected to signal lamps and other devices. Depending on the application, new I/O hubs are available in a 16DIO version with 16 configurable inputs and outputs or with ten inputs and six outputs. The Pepperl+Fuchs I/O hubs feature a rugged, molded metal housing and an extended temperature range that make them suited for use in harsh industrial environments.

Highlights of the Ethernet IO Modules and I/O Hubs

  • 8-port Ethernet IO modules with integrated IO-Link master and a slim, 30 mm width
  • I/O hubs with IO-Link interface for easily connecting up to 128 digital I/Os to a control system
  • Rugged molded metal housing for use in harsh industrial environments

For more information, visit HERE.

Related Articles

Changing Scene

  • Intralec Announces Leadership Transition in Northern GTA Sales Region

    Intralec Announces Leadership Transition in Northern GTA Sales Region

    Intralec has announced an upcoming leadership transition as Cameron Slade, currently Warehouse Supervisor, steps into the role of Outside Sales Representative for the Northern GTA region and North Ontario. Cameron will be filling in for Beverly Pisco, who will be beginning her maternity leave this June. Cameron brings a strong foundation in the electrical industry,… Read More…

  • Specialized Power Solutions Welcomes Jonathan Udy as New Sales Manager

    Specialized Power Solutions Welcomes Jonathan Udy as New Sales Manager

    Specialized Power Solutions is excited to welcome Jonathan Udy to their team! Jonathan joins Specialized Power Solutions with over a decade of experience in the electrical industry, beginning his career as a Journeyman Electrician working across commercial and industrial projects. He later transitioned into power distribution sales with ABB, where he spent over six years… Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Festo: Machine Safety – Why It Matters & How to Achieve It

    Festo: Machine Safety – Why It Matters & How to Achieve It

    For OEMs, machine builders, engineers, and plant managers, machine safety is more than regulatory compliance; it’s a responsibility to workers, a commitment to customers, and a strategic advantage. Every machine on the factory floor has two sides: its potential to drive productivity, and its potential to cause harm. Striking the right balance between performance and… Read More…

  • What Does Being a Gold Level Rockwell System Integrator Mean for Actemium Canada Clients?

    What Does Being a Gold Level Rockwell System Integrator Mean for Actemium Canada Clients?

    What does being a Gold Level Rockwell System Integrator mean to Actemium Canada clients? The obvious answer is that Actemium Canada brings a high level of expertise, knowledge, and experience to every project. But it also means added value in ways many people may not realize, including cost savings on hardware and an extended 3-year… Read More…