-
You are here:
-
Home
-
Changing Scene
-
Lakeside Launches New Service Center and Office in Sudbury, Ontario
March 23, 2021
Lakeside was recently excited to announce the opening of a new service center and office located at 131 Fielding Road, Lively, Ontario, (705)-585-4900. With this new space Lakeside will be able to focus on localized service for more efficient turnaround, and even quicker response times.
The Service Center is 4235 sq/ft, with an additional 2000 sq/ft of storage space on site. Lakeside have also relocated their sales office to this same site in order to centralize Lakeside’s service and support to one location. At this new service and assembly center, they will hold an inventory of Clarkson knife gate valves (KGV) for new and ENCORE assemblies. Lakeside's scope of services includes, KGV service, assembly and re-builds, isolation valve repair, relief valve service and certification, as well as control valve and actuator services. Expanding their footprint in Northern Ontario is another step forward in Lakeside’s vision to create the best possible experience for their customers. With this addition, Lakeside have now increased the number of localized field and shop services, assembly technicians, and expanded their overall capabilities.
Lakeside are proud to be able to enhance their service capabilities in Northern Ontario and look forward to continuing to create long-term value for their customers.
Source
Latest Articles
Support is something that all businesses have needed over the last couple years, whether that is ...
Siemens Smart Infrastructure has recently completed the acquisition of French startup Wattsense, a ...
Many companies struggle with the fact that they need a major technological upgrade to expand their ...
Bosch Rexroth, EPLAN, Festo, Murrelektronik, PILZ, Rittal and WAGO, seven prominent ...
It’s finally here – the new EPLAN Platform 2022. And with it, solutions provider EPLAN is heralding ...
54 plants are to be modernised, to upgrade Vaillant’s production of hot water storage cylinders to ...
The current supply situation of steel, chips and plastics has become tighter worldwide. ...
Situation: Worker approaches the enclosure and the disconnect switch for the 480V power source is ...
“Dirty Power” means an unclean supply system. This does not concern the means (environmental ...
Beckhoff Canada opened its Western Region Sales and Training Centre in the well-known Metrotower ...
CAMBRIDGE, Ontario, Aug. 24, 2021 – Beckhoff Canada opened a Western Region Sales and Training Centre in the technology-rich Vancouver area to increase sales development and market share growth. The 2,950-square-foot office is in Tower 1 of the prominent Metrotower Office Complex in downtown Burnaby, British Columbia.
The facility offers increased space for sales and engineering support, training and seminars, as well as an intelligent motion lab where Beckhoff product experts can test Flying Motion capabilities and machine concepts using the XPlanar system.
Read More
AutomationDirect has added a new series of Contrinex M18 photoelectric sensors to their ever-growing selection of discrete sensors, as well as a new sensor tester used with various sensor types to verify operation in the field.
The Contrinex M18 sensors are made in the USA and have a short body for easy installation in even the tightest locations. These sensors are available in diffuse, diffuse with adjustable background suppression, retroreflective, and through-beam models, and with NPN and PNP logic. All PNP models are IO-Link® compatible, and all sensor outputs are complementary, allowing them to be used as a light-on or dark-on sensor.
Read More
WESCO Distribution Canada LP recently announced that it has earned the Bosch Certified Excellence Partner designation. The Certified Excellence (CE) designation is an international program in the Partner Management of Bosch Rexroth, one of WESCO Canadas’s largest suppliers of automation and control products. Certified partners must provide the best and most reliable service to customers and are seen as an integral part of “ONE Rexroth Sales” worldwide.
WESCO will leverage its Certified Excellence designation to maximize the use of Bosch technologies to efficiently support customer operations wherever they are located.
Michael Gross, Vice President & General Manager of WESCO Canada stated, “With Bosch as a partner we are giving our customers and users a competitive advantage through safe, efficient, intelligent and high-performance solutions."
Read More
Product News
Phoenix Contact is extending its range of reflow-solder-capable PCB terminal blocks (MSL1) to ...
Sealcon’s A2F cable gland features an innovative design that saves space with its smaller ...
AutomationDirect has added more enclosures from Saginaw Control & Engineering, a leading ...
Widespread labor shortages and phenomenal growth in the online retail sector places enormous ...
The new safety card PMCprotego S3 expands the drive-integrated safe motion solution PMCprotego DS, ...
FANUC America, a leading supplier of CNCs, robotics and ROBOMACHINES, introduces an upgrade ...
The Type 3 safety light curtains PSENopt II from Pilz are the world’s first light curtain with ...
To maintain the highest level of customer satisfaction Pilz is getting very creative. The current ...
The powerful edge device integrates space-saving, fanless machine control directly into harsh ...
Festo has launched a digital learning portal for individual learning experiences. Discover the ...
Mitsubishi Electric is announcing the release of its CNC Offset Manager software for remote modification of computerized numerical control (CNC) tool and work offsets. With the push towards automation and central control, machining facilities are searching for more efficient ways to manage their CNC machines. The software can introduce increased efficiency in multiple ways: for instance, it allows one operator to manage more machines, speeding up machine setup and tool wear changes, or adjusts for parts out of tolerance, as well as centralizing this work so operators don’t need to move between machines or into robot cells. CNC Offset Manager is thus geared towards production managers and supervisors on factory floors across various industries, as well as towards CNC automation software companies.
Read More
Whether the utility provides electricity, gas, water, or sewage treatment, management has a duty to protect employees by providing a safe work environment and Personal Protective Equipment (PPE) required for the job in the facility and in the field. However, despite various PPE options, many utilities fail to supply or specify important lighting tools – namely headlamps. Unfortunately, the lack of suitable headlamps can lead to serious, even deadly accidents, in hazardous locations.
Download projects without any software
The new motion monitoring module PNOZ m EF 1MM2DO from the configurable small controller PNOZmulti 2 now also offers cascading and delayed shutdown functions in the field of safe motion monitoring. By monitoring up to eight safety functions on one axis, the new motion monitoring module provides efficient drive applications, thereby protecting both capital goods and the machine.
