Yokogawa Wins Order to Provide Control System and Field Instruments for Gas-fired Power Plant in Turkmenistan

April 6, 2020

Yokogawa Electric Corporation has recently announced that its subsidiary Yokogawa Turkey Industrial Automation Solutions A.S. (Yokogawa Turkey) has won an order to provide a control system and field instruments for the Zerger gas-fired power plant in Turkmenistan. The order was received from Renaissance Heavy Industries, a major construction company in Turkey that is involved in the construction of this plant for Turkmenenergo, a state-owned power utility in Turkmenistan. This is Yokogawa’s first control systems order for a power plant in this country.

Turkmenistan is a resource rich country with the world’s fourth-largest natural gas reserves. The country continues to experience steady economic growth thanks to its exports of natural gas and production of cotton and other agricultural products. To aid in the reconstruction of the neighboring country of Afghanistan, the Turkmen government concluded an agreement based on which it will supply electricity to that country for a ten-year period, beginning in 2018. The main source of this electricity will be the Zerger power plant, which generates power using locally-sourced natural gas. Located in the Chardzhev district of Lebap Province, approximately 600 km northeast of Ashgabat, the country’s capital, this is a simple cycle gas turbine power plant that will have three gas turbines with a combined capacity of approximately 400 MW. Sumitomo Corporation is the prime engineering, procurement and construction (EPC) contractor for this project, and the plant’s turbines and generators are being supplied by Mitsubishi Hitachi Power Systems (MHPS).

To monitor and control the plant’s three gas turbines and auxiliary facilities, Yokogawa will provide the CENTUM VP integrated production control system, DPharp EJA series differential pressure and pressure transmitters, and YTA610 temperature transmitters. Yokogawa Turkey will be in charge of providing engineering and support services for the installation and commissioning of this system, and will complete work on this project by September of this year. To provide support services, Yokogawa opened a sales and after-sales office in Turkmenistan in August 2015.

One of the Sustainable Development Goals for the year 2030 that were adopted at the UN Sustainable Development Summit is to ensure the provision of affordable and clean energy. Natural gas is an energy source whose combustion emits less CO2 than oil or coal, and as such is regarded as an important means for achieving a low carbon society. Taking advantage of its strong expertise and excellent track record in natural gas related plant construction projects, Yokogawa is helping to ensure the stable supply of power in markets all over the world, including Central Asia.

Source

Related Articles


Changing Scene

  • Weidmüller Canada Is Growing Their Team & Investing in the Future of Engineering

    Weidmüller Canada Is Growing Their Team & Investing in the Future of Engineering

    Weidmüller Canada is growing their team and investing in the future of engineering. They are proud to welcome Ada Santavy, Laura Cochrane, and William Watson, the newest hires of Weidmüller’s Engineering Launchpad Program, an innovative initiative that combines technical and soft skills training, mentorship from industry veterans, and hands-on project experience to develop well-rounded engineering… Read More…

  • Leviton Canada Announces Jim Hartery as New Territory Manager, Alberta

    Leviton Canada Announces Jim Hartery as New Territory Manager, Alberta

    Please join Leviton Canada in welcoming Jim Hartery to their team! Jim brings extensive experience in sales and account management within the electrical industry, along with a proven track record of building strong customer relationships, developing new business opportunities, and driving growth across both new and existing accounts. Leviton is thrilled to have Jim on… Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Texcan: Teck, Vertical Riser & AIRGUARD – Cable Solutions for Demanding Environments

    Texcan: Teck, Vertical Riser & AIRGUARD – Cable Solutions for Demanding Environments

    Teck, Vertical Riser Teck, and AIRGUARD address distinct installation needs for industrial and vertical‑riser installations. Each product targets specific installation needs: Teck for general industrial feeders, Vertical Riser Teck for continuous vertical runs, and AIRGUARD to deliver high crush resistance and corrosion protection on long runs. Understanding the differences in application can help ensure the right cable is selected for the… Read More…

  • Mouser: Industrial Ethernet vs Fieldbus – Architecture, TSN & Migration

    Mouser: Industrial Ethernet vs Fieldbus – Architecture, TSN & Migration

    Fieldbuses once replaced bundles of wiring with shared, deterministic networks. For years, they carried control signals reliably and predictably. However, as equipment, sensors, and data systems proliferated, fieldbus limitations emerged. The central issue today is real-time operational visibility. Engineers need networks that move control data, diagnostics, and process information across the plant as reliably as… Read More…