The New Normal in Canada’s Wire Cable Industry 

EIN Nexans Jerome 400

September 13, 2021

By Jerome Leroy – VP, North America, Buildings & Territories

In just 18 months, our industry has seen businesses locked down and borders closed. Lead times have grown from weeks to months and orders have been cancelled. Copper prices have nearly doubled and continue to increase. We’ve seen an increasing number of extreme weather events, for instance Texas shut down by cold weather and British Columbia hit by record heat. And, of course, the pandemic has affected every economy in the world.

Make no mistake: these events characterize a new normal where, we believe, we’re seeing the emergence – and acceleration – of two widescale trends. The first is supply chain disruption. The second is the rise of Corporate Social Responsibility (CSR).

Supply Chain Fear Factor

These days, lucky are the purchasing directors who are not facing supply chain challenges – raw materials for manufacturers, finished goods for distributors and installers, and volatile pricing for both. There are several reasons for this:

  1. Raw material shortage: Beginning with copper, several key wire cable components have been hard to find this year (PVC, aluminum, wood, etc.). The reality is that COVID has accelerated a long-term trend of copper production contraction, with mines closed for several weeks. Snow in Texas and the recent Hurricane Ida have also had a negative impact on production of plastic compounds (and to some extent on copper production as well).
  1. Market demand surge: While manufacturers and distributors with low inventory levels were recovering from COVID shortages, construction sites began reopening. Pandemic economic response plans provided incentives while good weather and the flux of people moving from urban to suburbs, smaller towns and rural areas only increased demand. From residential to commercial applications, our industry is processing volumes of cable we have not seen in years.
  1. Manufacturing limitations: In addition to stresses on raw material and labour, the Canadian market has been impacted by the US market recovery. American high demand combined with unusually high margins have pushed some manufacturers to momentarily step out of Canada to focus on US demand.

These events may or may not happen again, at least not at the same time. Copper prices are, however, likely to continue growing. As Goldman Sachs explained in a December 2020 report, we are currently at a peak in copper production that will decline for at least the next 20 years, while demand driven by cables, batteries, etc., will continue to grow. What’s more, unexpected weather events have and will keep happening – bigger and more frequently if we listen to environment experts, which will contribute to cause disruptions.

 

CSR and Climate Change

Until recently, ‘CSR’ meant Customer Service Representative to most businesses. While more top of mind in Europe until recently, Canadian companies are catching up on Corporate Social Responsibility (CSR). One reason for increased awareness: large corporations are being pushed to work on and publish their Environmental, Social and Governance (ESG) reports, because more investors, like Black Rock, are taking carbon emissions into account when investing.

Another reason? Companies are feeling the rise of CSR-related challenges locally – in particular companies like utilities, committed to carbon neutrality. In the years ahead, manufacturers will need to redefine their way of doing business and find a way to emit less CO2, directly or indirectly. The same goes with public buildings that require LEED certification, which will in turn pressure manufacturers to address their carbon impact. Beyond CO2, several utilities are focusing on community issues — like local employment – in their ESG reports and supplier evaluations.

There are even more CSR-related changes to come that will impact businesses in Canada. Two examples: a potential Green New Deal in the US that radically accelerates CO2 emission cuts by 2030 and would likely force Canada to follow suit. And a Dutch court ruling that requires the global oil and gas giant Shell to cut CO2 emissions generated by both its oil and gas and oil products production, which could put the same pressure on carbon-intensive Canadian companies to comply. In the cable industry, Europe has made good progress in calculating and benchmarking CO2 emissions of cables, while requiring manufacturers to continually monitor environmental regulations (e.g., REACH, RoHS) for allowed materials and ensure they comply. Finally, with recent events in British Columbia, and Canada experiencing the second fastest growing average temperature globally, heightened political and legal pressure are just around the corner even without international action.

Embracing These Trends

It’s a new world Nexans is already preparing itself, its clients and the industry for. Last year, we announced that we would focus on service quality, dedicating most of our capacity to top customers. We also reinforced the integration of our operations with our Montreal Copper Rod Mill to sharpen operations. This has proven to be the right decision, allowing us to ensure business continuity with all our clients.

In the meantime, we are paving the way to a CSR-compatible way of doing business. Leveraging the experience Nexans built in Europe, we are already reducing our carbon footprint and we built a roadmap to lead us further. And we are engaged with our key suppliers and clients to do more.

As an active member of the Canadian community for 110 years, we have seen, supported, and led some of the biggest changes in our industry. We are eager to embrace these latest trends and challenges, together with our partners.

Related Articles


Changing Scene

  • Westburne and Kinova Announce Groundbreaking Partnership

    Westburne and Kinova Announce Groundbreaking Partnership

    Westburne is thrilled to announce a groundbreaking partnership that is set to redefine the landscape of collaborative robotics. Westburne has joined forces with Kinova, a global provider in robotics innovation, to deliver cutting-edge solutions that will transform industries and elevate Westburne’s commitment to technological advancement. This partnership marks a significant milestone in Westburne’s journey towards… Read More…

  • ABB Appoints Morten Wierod to Succeed Björn Rosengren as CEO

    ABB Appoints Morten Wierod to Succeed Björn Rosengren as CEO

    The ABB Board of Directors has appointed Morten Wierod as Chief Executive Officer. He will take office on August 1, 2024, and succeed Björn Rosengren, who will step down from his position as Chief Executive Officer effective July 31, 2024, and retire as of December 31, 2024. From August 1, 2024, until the end of… Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Helping McMaster University Adapt its Buildings for the Future

    Helping McMaster University Adapt its Buildings for the Future

    McMaster University is using technology to better control and manage its legacy thermal systems and create smarter buildings. Carmichael Engineering Ltd., a Canadian systems integrator, worked closely with ABB Canada’s experts and its highly adaptable smart building platform, ABB Cylon, to improve energy efficiency, enhance user adaptability, and leverage innovative technologies in locations across campus. Read More…

  • FLIR’s Thermal Camera Technology: A Crucial Component in Industrial Settings

    FLIR’s Thermal Camera Technology: A Crucial Component in Industrial Settings

    Thermal imaging technologies like the ones by FLIR improve safety, operational efficiency, and cost savings in many automated and industrial applications. By capturing the infrared radiation emitted by an object or process, it identifies thermal anomalies that warrant further investigation by experts. Today, thermography is more sophisticated and accessible than ever, making is easy for… Read More…