|

Kooltronic: Six Common Mistakes to Avoid When Choosing an Enclosure Fan

May 2, 2025 - Kooltronic_ Six Common Mistakes to Avoid When Choosing an Enclosure Fan

May 2, 2025

Thermal Management Insights to Avoid Mistakes with Your Enclosure Fan

Electrical cabinet cooling fans and fan trays can be economical and straightforward thermal management solutions in many applications. However, there are several factors that must be considered to achieve optimal enclosure cooling results. You can avoid making common mistakes if you consider the following factors when selecting an enclosure cooling fan.

6 Common Mistakes

1. Account for Dirty Air

Make sure the surrounding environmental air will not bring particulate or dirt into the enclosure. Certain industries like manufacturing and transportation are particularly notorious for dusty air.

2. Measure Ambient Air Temperature

Be certain that the ambient air temperature is cool enough. Higher ambient air temperatures may not have the ability to adequately remove the heat generated within an electrical cabinet.

3. Be Aware of Corrosive Environments

Components housed within the enclosure should not be exposed to any detrimental airborne contaminants. Bringing in corrosive air is harmful to sensitive electronics and electrical equipment.

4. Consider Space Within the Enclosure

If the electrical cabinet is too tightly packed, air movement will be restricted. This will reduce the efficiency of the enclosure cooling fan because cool air needs room to circulate in order to do its job properly.

5. Be Mindful of Air Flow

Is the cubic feet per minute (CFM) sufficient for the size of the control cabinet? Selecting the appropriate air flow for your enclosure fan will greatly enhance its ability to extract heat and keep electrical components operating at peak efficiency.

6. Know Your NEMA Rating

Be sure to match the enclosure fan to your enclosure’s NEMA rating. Consequently, choosing the wrong NEMA-style cooling fan can compromise the enclosure rating.

Kooltronic, Inc. manufactures a wide variety of NEMA-rated enclosure fans and fan trays, filter fans and blowers to suit almost any cooling application. Contact Kooltronic to see if an enclosure fan is the right choice for your project!

Kooltronic_-Six-Common-Mistakes-to-Avoid-When-Choosing-an-Enclosure-Fan

Source

Related Articles

Changing Scene

  • Intralec Announces Leadership Transition in Northern GTA Sales Region

    Intralec Announces Leadership Transition in Northern GTA Sales Region

    Intralec has announced an upcoming leadership transition as Cameron Slade, currently Warehouse Supervisor, steps into the role of Outside Sales Representative for the Northern GTA region and North Ontario. Cameron will be filling in for Beverly Pisco, who will be beginning her maternity leave this June. Cameron brings a strong foundation in the electrical industry,… Read More…

  • Specialized Power Solutions Welcomes Jonathan Udy as New Sales Manager

    Specialized Power Solutions Welcomes Jonathan Udy as New Sales Manager

    Specialized Power Solutions is excited to welcome Jonathan Udy to their team! Jonathan joins Specialized Power Solutions with over a decade of experience in the electrical industry, beginning his career as a Journeyman Electrician working across commercial and industrial projects. He later transitioned into power distribution sales with ABB, where he spent over six years… Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Festo: Machine Safety – Why It Matters & How to Achieve It

    Festo: Machine Safety – Why It Matters & How to Achieve It

    For OEMs, machine builders, engineers, and plant managers, machine safety is more than regulatory compliance; it’s a responsibility to workers, a commitment to customers, and a strategic advantage. Every machine on the factory floor has two sides: its potential to drive productivity, and its potential to cause harm. Striking the right balance between performance and… Read More…

  • What Does Being a Gold Level Rockwell System Integrator Mean for Actemium Canada Clients?

    What Does Being a Gold Level Rockwell System Integrator Mean for Actemium Canada Clients?

    What does being a Gold Level Rockwell System Integrator mean to Actemium Canada clients? The obvious answer is that Actemium Canada brings a high level of expertise, knowledge, and experience to every project. But it also means added value in ways many people may not realize, including cost savings on hardware and an extended 3-year… Read More…