AutomationDirect: Power Machine Tray Cable Cut-to-Length from AutomationDirect

August 13, 2019

Power Machine Tray Cable is available in sizes from 18 AWG to 8 AWG with 3 to 25 unshielded conductors. Individual conductors are bare copper and stranded for flexibility, with black PVC/Nylon insulation and marked with numbers for easy identification.

The black Thermoplastic Elastomer (TPE) cable outer jacket is flexible and resistant to sunlight, oil, and moisture penetration; making the cables suitable for wet and dry indoor and outdoor locations.

With a Tray Cable Exposed Run rating (UL Type TC-ER), the cable can be installed not only in a cable tray but also between the tray and devices or equipment without metal conduit, resulting in installation and maintenance savings. Other ratings and approvals include UL Type MTW (Machine Tool Wire), UL Type WTTC (Wind Turbine Tray Cable), Class 1 Division 2 Hazardous Locations and Direct Burial.

Power Machine Tray Cable from AutomationDirect is available in cut-to-length 1-foot increments starting at $0.41 per foot (with a 20-foot minimum).

Learn more by visiting: www.automationdirect.com/tray-cable

Related Articles

  • |

    IDEAL Debuts SureTrace Pro Circuit Tracer

    IDEAL proudly unveils the SureTrace Pro Circuit Tracer – a flagship addition to its trusted SureTrace line that offers exceptional performance. Built for speed, accuracy, and troubleshooting convenience, the SureTrace Pro combines industry-exclusive innovations like a built-in auto continuity tester, dual rotating OLED displays, and AC amperage measurement via a rechargeable Inductive Sensing Clamp. The all-in-one SureTrace Pro empowers professional electrical contractors and electricians to save time and lighten their toolbelts by eliminating the need for multiple meters.

  • Pilz: PSENmlock Mini and PSENslock 2

    When protecting guards, there are various factors to consider, depending on the application. For example, the type of safety gate, the respective installation situation and how it is used. With this in mind, Pilz is adding two new sensors to its portfolio of safety locking devices – PSENmlock mini for space-critical applications and PSENslock 2 with optimized hygienic design, as well as new versions with stainless steel components. Both sensors offer particular benefits for the packaging and pharmaceutical industry, and for the food and beverage sector.

  • |

    Phoenix Contact: Versatile in Use – The New Universal Tools

    The Unifox-MP multifunctional pliers with ergonomic two-component handle combine six or seven functions in a single tool. They make it possible to not only grip, bend, and cut wires, but also to strip cables and crimp ferrules. Their angled tip can be used to easily pierce and deburr flush-mounted sockets. While the Unifox MP 6-1 can be used to cut cables without crushing, the Unifox-MP 7-1 has a diagonal cutter. This means that fine, medium-hard, and piano wires can be effortlessly cut to length. In addition, the pliers provide a crimping area for insulated ring cable lugs. The Unifox-Wrench pliers wrench combines the functions of pliers and a wrench. Ideal for gripping, holding, bending, and turning nuts and bolts, it offers continuous adjustment via push button and an integrated scale for quick and easy setting of the wrench size. The smooth gripping jaws, which can be moved in parallel, protect sensitive surfaces against damage. Thanks to the leverage ratio of greater than 10:1, the pliers wrench ensures a high clamping force and therefore a secure hold. The Unifox-LM “Linemans” combination pliers are ideal for gripping, bending, and twisting wires as well as for pin crimping uninsulated cable lugs. The ergonomic two-component handle ensures comfort, while the toothed gripping surfaces and the additional gripping area below the joint provide optimum grip. With the extra-long blades with a cutting hardness of 62-64 HRC, the Unifox LM offers optimum cutting performance and durability.

  • | |

    Altech Corp Announces Advanced Fan Monitoring Modules for Industrial Equipment Protection

    Altech Corporation has announced its new CFTD fan monitoring modules, designed to protect industrial equipment through intelligent fan current monitoring and temperature control. The series includes three models: CFTD2 (two-fan), CFTD4 (four-fan standard) and CFTDPR4 (four-fan with AC power redundancy). Each system features precision current monitoring with configurable over- and under-current thresholds and automatic calibration that establishes baseline parameters for accurate fault detection. Models also include three-wire RTD sensor inputs for temperature monitoring with programmable set points and 4–20mA analog output for integration with building management systems. Three fault recovery methods boost operational flexibility: alarm-only, manual reset or automatic retry with 30-second intervals. The flagship CFTDPR4 offers AC power redundancy, automatically switching to backup fans when primary power fails and ensuring continuous cooling during power faults.

Changing Scene

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • PULS: Active Load Sharing for DIN Rail Power Supplies

    PULS: Active Load Sharing for DIN Rail Power Supplies

    October 20, 2026 Discover How Active Load Sharing Offers a More Precise Way to Combine Multiple DIN Rail Power Supplies When an industrial application requires more power than a single DIN rail power supply can deliver, connecting several units in parallel is an obvious solution. The technical challenge is to distribute the load evenly without… Read More…

  • Rockwell Automation: The 5 Priorities Defining Manufacturing’s Next Chapter

    Rockwell Automation: The 5 Priorities Defining Manufacturing’s Next Chapter

    A few years ago, the focus was on digital transformation itself. Organizations were asking whether they should invest, where to begin, and how quickly they could justify the cost. Today, the debate is largely over. According to Rockwell Automation’s 11th annual State of Smart Manufacturing Report, 90% of manufacturers now say digital transformation is necessary… Read More…