New ATEX Cabinet Cooler Systems for Explosive Environments from Exair

April 30, 2024

EXAIR’s new 316 Stainless Steel ATEX Cabinet Cooler® Systems are the latest solution for protecting sensitive electronics in ATEX classified areas.

This low cost and reliable product is UL tested, CE compliant, and meets the stringent requirements for use upon classified purged and pressurized electrical enclosures within Zones 2 and 22. With cooling capacities up to 5,600 Btu/Hr., it’s an ideal answer for protecting electrical enclosures with problematic overheating in areas with explosive atmospheres, both indoors and outdoors.

EXAIR ATEX Cabinet Coolers produce and circulate cold air inside enclosures to prevent overheating, high temperature faults and costly shutdowns. They easily mount via a standard electrical knockout while maintaining the NEMA 4/4X integrity of enclosures in explosible areas. These systems include an auto-drain filter separator to ensure no water, dirt, or contaminants from the compressed air system pass into the electrical enclosure. Thermostat controls are available to minimize compressed air use, and cold air distribution kits ensure balanced cold air flow to all areas of the enclosure.

In addition to ATEX, EXAIR carries an extensive line of Cabinet Coolers ranging from NEMA 12, 4, 4X and Hazardous Locations. All EXAIR Cabinet Cooler Systems are CE compliant and UL listed, and are built to last with no moving parts to wear out. Applications include cooling control panels, motor control centers, CCTV cameras, laser housings and much more. Prices start at $2,418.

More information available here

Related Articles

Changing Scene

  • ABB DPA UPScale ST UPS Systems Achieves PEP Ecopassport Certification

    ABB DPA UPScale ST UPS Systems Achieves PEP Ecopassport Certification

    ABB’s DPA UPScale ST UPS systems have received PEP (Product Environmental Profile) Ecopassport certification, which is an environmental declaration aligned with the ISO14025 standard, specifically designed for electrical, electronic, and HVAC-R products. The certification is supported by a detailed Life Cycle Assessment (LCA), which quantifies environmental impacts from raw material extraction through manufacturing, transportation, usage, and end-of-life disposal. The PEP… Read More…

  • New Copper & Zinc Mine to Boost Saskatchewan’s Critical Minerals

    New Copper & Zinc Mine to Boost Saskatchewan’s Critical Minerals

    On October 15, Energy and Resources Minister Colleen Young visited Foran Mining Corporation’s (Foran) Exploration Warehouse in Saskatoon. Foran’s McIlvenna Bay mine in northeastern Saskatchewan is expected to begin production of copper and zinc at a commercial scale in mid-2026. McIlvenna Bay is a key project for the diversification of Saskatchewan’s mining sector and is… Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • The Power of OMRON’s Sysmac Studio: Unify Automation & Integrate Safety

    The Power of OMRON’s Sysmac Studio: Unify Automation & Integrate Safety

    Industry moves fast. Outpace obsolescence with OMRON’s Sysmac Studio. Designed to empower operations from the edge to the cloud, it unifies automation by prioritizing safety and security. Built for today, ready for the future. Today, the factory floor faces pressure from suppliers, consumers, competition, and emerging technologies. Operation teams are looking to remain competitive while making… Read More…

  • From Hospitals to Hyperscalers: Why Every Sector Needs Smarter Backup Power

    From Hospitals to Hyperscalers: Why Every Sector Needs Smarter Backup Power

    Whether running a data center, factory, hospital, or a commercial building complex, organizations need efficient and reliable uninterruptible power supplies (UPS) with intelligent features to prevent disruptions. Too much is at stake to have critical workloads stop during outages or anomalies in the power supply. Now more than ever, with extreme weather and increasing demands on the… Read More…