Schneider Electric: New ArcBlok Arc Flash Mitigation Tool

December 7, 2022

Earlier this fall Panel Builder & Systems Integrator had the opportunity to attend Schneider Electric’s North America Innovation Summit. The event brought together Schneider employees and a broad range of electrical and automation clients from numerous countries, including a strong presence from Canada.

The Innovation Summit truly lived up to its name, with a consistent focus on digitization, electrification and sustainability. It is these three core drivers that Schneider is designing into all its products, solutions and plans as it focuses on developing an electrified and sustainable future.

A core focus of the event was showcasing new products that are being developed around this concept. One such product was ArcBlok, a new arc flash mitigation tool.

Arc flash is a serious concern for anyone who works on electrical equipment, and has received increased attention and safety protocols in recent years. Industry standards from IEEE (IEEE 1584) and the NFPA provide guidelines for assessing and managing the risks associated with an arc flash incidence. Although these standards define work practices to safeguard employees from injury while exposed to electrical hazards, a fundamental challenge remains: what else can be done to move arc flash mitigation from work practices to engineering controls and reduce the likelihood of occurrence or the severity of an arc flash?

And although there are several mitigation products on the market Schneider has developed a unique tool that is designed to keep workers safe and provide a sustainable means of mitigating arc flash incidence.

Panel Builder & Systems Integrator worked with a Schneider expert to gain more insight into how it works and the benefits it is delivering today.

A Look at the New ArcBlok Technology

The new ArcBlok technology within their Motor Controls Centers or MCCs, brings a new level of performance to arc flash mitigation. The passive system provides arc isolation for even the most dangerous area in any line-up, the line side conductors. The line side is where the power comes into the equipment and typically presents a high-incident energy risk in the electrical line-up. At the same time, it is also the most difficult zone to protect due to utility dependency for de-energizing the equipment.

With ArcBlok, Schneider has developed a solution to address that area – the line side. ArcBlok is the only product UL verified to limit the incident energy exposure to below 1.2 cal/cm2 on the line side. It is a passive system; once the module is properly installed in the electrical equipment, it is always protecting whether during operation or maintenance. This is what Schneider calls “safety by design.” Unlike other more complex solutions that require light detectors, arc flash relays, and/or some upstream protective device to ultimately clear the fault, ArcBlok is a passive system and is inherently self-clearing within less than one cycle (16.6 ms).

In addition to these benefits, ArcBlok does not require any powering, special commissioning, testing or user intervention – and there are no special maintenance procedures required other than periodic cleaning on a similar basis to standard electrical equipment. Best of all, ArcBlok is available as a productized offer in Schneider Electric Motor Control Centers and Switchboards AND as a Service retrofill solution for Schneider Electric and other third-party equipment. To sum it up, ArcBlok is a simple and cost-effective solution to protect people and equipment from high incident energy arc flash events on the line side.

A Look at ArcBlok’s Sensors

Another feature of the ArcBlock MCC is wireless thermal sensors. Critical connections in ArcBlok 2500 are equipped with wireless, battery powered temperature sensors that communicate via Zigbee protocol. These CL110 sensors are located on the bottom of each ArcBlok heat sink and continuously measure the temperature of the line side lugs. This makes it unnecessary to perform infrared thermagraphy in this area, and thus workers can avoid exposure to the line conductors.

With EcoStruxure Power Monitoring Expert, data can be viewed in real time and as a trend-over-time, allowing for early detection of gradual changes. This information can be easily read on your smart phone while standing outside the arc flash boundary. Using this expert, phase temperatures and phase to phase temperature discrepancy are continuously compared to pre-alarm and alarm thresholds, notifying users of an abnormal temperature rise.

In addition to the thermal sensors, ArcBlok is equipped with an arc flash event indicator – a pressure sensor to monitor and indicate when an arc flash has occurred and been contained. With an EcoStruxure Service Plan subscription, Schneider Electric’s Connected Services Hub can leverage ArcBlok data when analyzing the electrical system to interpret its status and history, providing expert insights for the installation.

A Look at Sustainability

ArcBlok fully complies with the Schneider Electric Green PremiumTM claim, and therefore fulfills environmental regulations for hazardous material like REACH and RoHS. It also supports Schneider Electric’s journey towards green packaging, e.g. using recycled cardboard instead of single use plastic.

In addition, ArcBlok ties into sustainability due to its compact design that comes with a much smaller carbon footprint compared to some other arc flash protection solutions. Moreover, ArcBlok is guaranteed to clear and withstand multiple arc flash events, protecting the equipment from damage caused by an arc flash event – no need to replace ArcBlok or the gear it’s protecting.

Main Take-Aways:

Arc Flash incidents can occur for a number of reasons. Foreign objects like tools or rodents reaching into live areas are some common reasons why it happens. Degradation of insulating materials and connections over time can also contribute to an arc flash, as can abrupt energy spikes or loose electrical connections. There is no comprehensive statistical information on how often objects cause an issue, but it is an area that Schneider is investigating together with third party experts.

The main take-away is that there is no prediction for an arc flash. ArcBlok reduces the likelihood of an arc flash event before it happens, and greatly reduces the duration and intensity of an arc flash event at the line side. With the ArcBlok isolating cable vault, line side conductors are tightly enclosed, which prevents foreign objects from entering live areas. ArcBlok’s isolating phase barriers limit the duration of the arc and reduce the incident energy release during an arc fault event. ArcBlok controls where the arc can exist and interrupts the arc using circuit breaker design principles with self-extinguishing features outside the breaker on the line side of the electrical system.

Because of this, ArcBlok has been recognized as a method to isolate energy on the line side of a circuit breaker as per the 2021 NFPA 70E Annex O.2.3(5). Phase barriers in the ArcBlok module are a tested solution to prevent, isolate, and extinguish an arc fault. ArcBlok contains the arc flash energy and cools vented gases to below restrike temperature – then purposefully directs exhaust away from user (<1.2 cal/cm2) through bottom or top vents (depends on whether equipment is bottom or top fed).

Line side arcs don’t stand a chance inside the isolated ArcBlok vault – they extinguish and self-clear in less than a cycle (16.6 ms), ensuring fast recovery for up to 5 arc flash events. Whether you are updating your existing MCC or buying a new one, get a new level of arc flash detection with ArcBlok technology from Schneider Electric.

Learn more HERE.

Related Articles


Changing Scene

  • Westburne and Kinova Announce Groundbreaking Partnership

    Westburne and Kinova Announce Groundbreaking Partnership

    Westburne is thrilled to announce a groundbreaking partnership that is set to redefine the landscape of collaborative robotics. Westburne has joined forces with Kinova, a global provider in robotics innovation, to deliver cutting-edge solutions that will transform industries and elevate Westburne’s commitment to technological advancement. This partnership marks a significant milestone in Westburne’s journey towards… Read More…

  • ABB Appoints Morten Wierod to Succeed Björn Rosengren as CEO

    ABB Appoints Morten Wierod to Succeed Björn Rosengren as CEO

    The ABB Board of Directors has appointed Morten Wierod as Chief Executive Officer. He will take office on August 1, 2024, and succeed Björn Rosengren, who will step down from his position as Chief Executive Officer effective July 31, 2024, and retire as of December 31, 2024. From August 1, 2024, until the end of… Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Helping McMaster University Adapt its Buildings for the Future

    Helping McMaster University Adapt its Buildings for the Future

    McMaster University is using technology to better control and manage its legacy thermal systems and create smarter buildings. Carmichael Engineering Ltd., a Canadian systems integrator, worked closely with ABB Canada’s experts and its highly adaptable smart building platform, ABB Cylon, to improve energy efficiency, enhance user adaptability, and leverage innovative technologies in locations across campus. Read More…

  • FLIR’s Thermal Camera Technology: A Crucial Component in Industrial Settings

    FLIR’s Thermal Camera Technology: A Crucial Component in Industrial Settings

    Thermal imaging technologies like the ones by FLIR improve safety, operational efficiency, and cost savings in many automated and industrial applications. By capturing the infrared radiation emitted by an object or process, it identifies thermal anomalies that warrant further investigation by experts. Today, thermography is more sophisticated and accessible than ever, making is easy for… Read More…