Vocational Training at Siemens

September 15, 2020

Around 10.400 young men and women worldwide – thereof around 7,300 in Germany – are currently enrolled in training or two-track programs at Siemens, making the industrial company one of the largest most innovative private providers of such programs in the world. Due to the great success of the German model, Siemens is increasingly offering two-track training, which combines theory and practice, to young people in countries outside Germany, including the U.S., Canada, Mexico, South Africa, India and the UK. These programs offer instruction in a wide range of commercial and, above all, technical fields. Courses are constantly being updated in a targeted fashion to prepare young people for the challenges of the future.

Since the training year 2017, Siemens has integrated relevant digitalization topics, such as data analytics, software development and data security, in the company’s curricula for all its apprenticeship and work-study programs. Didactic and methodological teaching approaches were also revised to accommodate the digital transformation of the programs’ training content and of the occupational subject matter.

“Occupational training is foundational for our company’s future. One clear focus of our training program is on the responsible use of digital technologies, which are bringing enormous change to the working world and to society. For years now, we’ve been continuously adapting our training programs to new requirements, to digital content and to agile teaching methods in order to keep pace with these changes. In this way, we can ensure that our trainees are well prepared for the future,” said Thomas Leubner, who heads the company’s Learning and Education department.

The success of the training system is also shown by the International Tech Apprenticeship@Siemens (ITA@S) program, which was established in 2012, back then under the name Europeans@Siemens. Young people are being sent to Berlin by the Siemens Regional Companies in their respective countries for dual educational training. In the past few years, however, an increasing number of participants have come from countries outside Europe. Consequently, the program now has a new name: ITA@S.

Since the start of the vocational training in Berlin in 1891 more than 165,000 people have undergone training with Siemens in Germany alone.

Siemens is also blazing new trails when it comes to recruiting trainees. In its “MINTfluencer” social-media campaign, short video clips star Siemens trainees as influencers. The campaign name is a word play on “MINT,” which is the German equivalent of science, technology, education and mathematics (STEM).

Source

Related Articles


Changing Scene

  • MacKinnon Magnetics Announces Resilient Sales Corporation as Their Newest Sales Agency Partner

    MacKinnon Magnetics Announces Resilient Sales Corporation as Their Newest Sales Agency Partner

    MacKinnon Magnetics is pleased to welcome Resilient Sales Corporation as their newest sales agency partner. Resilient Sales will represent MacKinnon Magnetics across Northeastern Ontario, including the Districts of Muskoka and Parry Sound. Key markets include Sudbury, North Bay, Timmins, Kirkland Lake, Sault Ste. Marie, Huntsville, Bracebridge and Parry Sound. This partnership expands MacKinnon Magnetics regional… Read More…

  • Canada Controls Announces the Grand Opening of Their New Edmonton Branch

    Canada Controls Announces the Grand Opening of Their New Edmonton Branch

    Canada Controls is excited to officially celebrate the Grand Opening of their new branch in Edmonton, Alberta! Join them on September 10th from 10 AM–4 PM as they welcome customers, partners, and friends to their newest location. Come meet the team, connect with their industry partners, and enjoy some great food. Most importantly, Canada Controls… Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Electromate: Spring Applied & Power-Off Permanent Magnet Brakes – Engineering Failsafe Motion Control

    Electromate: Spring Applied & Power-Off Permanent Magnet Brakes – Engineering Failsafe Motion Control

    Most electromagnetic brakes work on a simple logic: apply current, apply braking. Remove current, release braking. For many industrial applications, conveyors, packaging lines, printing machines, this is exactly the right behavior. The brake engages on demand and releases when not needed. But for a significant class of machines, this logic is exactly backwards. Robots, vertical… Read More…

  • ITC 101 Series: Why Certifications (UL, CSA) Matter in Industrial Components

    ITC 101 Series: Why Certifications (UL, CSA) Matter in Industrial Components

    When selecting industrial electrical components, certification is more than a logo on a datasheet. A certification mark indicates that a product or component has been independently evaluated against specified requirements for its intended market. In North America, selecting products with the appropriate certification can affect regulatory acceptance, equipment certification, inspections and project completion. The key… Read More…