Panel Builder System Integrator

Tom MiguelAt fourteen, Tom Miguel was sitting in the counselor’s office of Silverthorn Collegiate Institute in Etobicoke with his entire life ahead of him.

 

 

EIN Jenny Schneider 400Jenny Ng is a Business Development Manager for the Power Solutions Division of Schneider Electric. Thus far, she has spent the whole of her career in the energy sector in various roles.

 

 

PB CA Alexander2 400

Chad Alexander is a Branch Manager with Contact Automation, which provides automation integration and control services for the Oil & Gas industry throughout Western Canada and Northwestern United States.

 

 

PBSI Milner 400Rob Milner is the Canadian National Science, Automation, Optical Gas Imaging & sUAS Manager for FLIR. Rob took some time out of his busy schedule to discuss his career and provide some insight on the industry with Panel Builder & Systems Integrator.

 

 

 

Jon Watson Eramosa 400After attending Georgian College in Barrie, Ontario for Electrical Engineering Technology and Automated Systems, Jon Watson began as a System Integrator at Eramosa Engineering right out of school.

 

 

 

Chris Beharrell Exceed 400

Chris Beharrell is a Control Systems Engineer for Exceed Electrical Engineering, a company he founded earlier this year along with Joshua Laye.

 

 

 

DavidBlake 400At 68-years young, David is a veteran of the industry, spending the majority of his 40-year career with Electrozad dealing with automation related components, dating back to the introduction of PLCs (Programmable Logic Controllers).

 

 

 

PBSI Omar Vineland 400

Omar Abdelzaher is Systems Integration Project Manager with an impressive resume thus far in the industry. Currently, he leads the Robotics & Automation - Systems Integration team, a new venture for Vineland Research and Innovation Centre.

 

 

Core logoJustin Harris is a Programmer/Electrician for COREngineering, a New Brunswick based mechanical engineering firm that specializes in the design of custom equipment.

 

 

 

Changing Scene

  • Prev
It’s finally here – the new EPLAN Platform 2022. And with it, solutions provider EPLAN is heralding ...
54 plants are to be modernised, to upgrade Vaillant’s production of hot water storage cylinders to ...
Allied Electronics & Automation added three new suppliers to its industrial ...
Beckhoff Canada opened its Western Region Sales and Training Centre in the well-known Metrotower ...
Upon popular demand, Rittal is pleased to extend their annual summer promo on their hottest selling ...
Rockwell Automation, Inc., a global company dedicated to industrial automation and digital ...
ABB has recently announced it will acquire ASTI Mobile Robotics Group (ASTI), a leading global ...
Schneider Electric is introducing a personalized digital experience for logged in customers ...
Littelfuse, Inc., an industrial technology manufacturing company empowering a sustainable, ...


Pilz: Clearing The Way For Cylinder Production

 

Pilz Cylinder Technology54 plants are to be modernised, to upgrade Vaillant’s production of hot water storage cylinders to state-of-the-art electrical and safety technology. The safety design for cylinder production was to incorporate a barrier-free solution for two older production lines, combining safety with efficiency. The loading and unloading area presented a challenge, as it was to be free of any disruptive structures.

Safety that's almost artistic

On the basis of the hazard assessment Pilz developed an unusual safety solution using the light curtains PSENopt II. The individual positioners are accessible from three sides and secure cylinders of various sizes, which are fed in manually and via crane. 

Read More


 

Latest Articles

  • Prev
Support is something that all businesses have needed over the last couple years, whether that is ...
Siemens Smart Infrastructure has recently completed the acquisition of French startup Wattsense, a ...
Many companies struggle with the fact that they need a major technological upgrade to expand their ...
  Bosch Rexroth, EPLAN, Festo, Murrelektronik, PILZ, Rittal and WAGO, seven prominent ...
It’s finally here – the new EPLAN Platform 2022. And with it, solutions provider EPLAN is heralding ...
54 plants are to be modernised, to upgrade Vaillant’s production of hot water storage cylinders to ...
The current supply situation of steel, chips and plastics has become tighter worldwide. ...
Situation: Worker approaches the enclosure and the disconnect switch for the 480V power source is ...
“Dirty Power” means an unclean supply system. This does not concern the means (environmental ...
Beckhoff Canada opened its Western Region Sales and Training Centre in the well-known Metrotower ...

WESCO Canada Designated a Bosch Certified Excellence Partner

PB-49-Wesco-logo-400.jpg

WESCO Distribution Canada LP recently announced that it has earned the Bosch Certified Excellence Partner designation. The Certified Excellence (CE) designation is an international program in the Partner Management of Bosch Rexroth, one of WESCO Canadas’s largest suppliers of automation and control products. Certified partners must provide the best and most reliable service to customers and are seen as an integral part of “ONE Rexroth Sales” worldwide.

WESCO will leverage its Certified Excellence designation to maximize the use of Bosch technologies to efficiently support customer operations wherever they are located.

Michael Gross, Vice President & General Manager of WESCO Canada stated, “With Bosch as a partner we are giving our customers and users a competitive advantage through safe, efficient, intelligent and high-performance solutions."

Read More

Product News

  • Prev
Phoenix Contact is extending its range of reflow-solder-capable PCB terminal blocks (MSL1) to ...
Sealcon’s A2F cable gland features an innovative design that saves space with its smaller ...
AutomationDirect has added more enclosures from Saginaw Control & Engineering, a leading ...
Widespread labor shortages and phenomenal growth in the online retail sector places enormous ...
The new safety card PMCprotego S3 expands the drive-integrated safe motion solution PMCprotego DS, ...
FANUC America, a leading supplier of CNCs, robotics and ROBOMACHINES, introduces an upgrade ...
The Type 3 safety light curtains PSENopt II from Pilz are the world’s first light curtain with ...
To maintain the highest level of customer satisfaction Pilz is getting very creative. The current ...
The powerful edge device integrates space-saving, fanless machine control directly into harsh ...
Festo has launched a digital learning portal for individual learning experiences. Discover the ...

Mitsubishi Electric Releases CNC Offset Manager Software

PBUS-31-Mitsubishi-CNCOffsetManagerSoftware-400.jpg

Mitsubishi Electric is announcing the release of its CNC Offset Manager software for remote modification of computerized numerical control (CNC) tool and work offsets. With the push towards automation and central control, machining facilities are searching for more efficient ways to manage their CNC machines. The software can introduce increased efficiency in multiple ways: for instance, it allows one operator to manage more machines, speeding up machine setup and tool wear changes, or adjusts for parts out of tolerance, as well as centralizing this work so operators don’t need to move between machines or into robot cells. CNC Offset Manager is thus geared towards production managers and supervisors on factory floors across various industries, as well as towards CNC automation software companies.

Read More


 

Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2021 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil