| | | |

Endress+Hauser: FlexView FMA90 – Control Unit for Level & Flow Measurement

Nov 11, 2025 - Endress+Hauser FlexView FMA90 - Control Unit for Level & Flow Measurement 1

November 11, 2025

FlexView FMA90: Seamless Integration with Modern Connectivity & Dual Sensor Support for a Wide Range of Applications

FlexView FMA90 is a control unit for radar, ultrasonic and hydrostatic or universal 4-20 mA level sensors. It connects up to two sensors simultaneously and provides 8 digital switching outputs. Available in field, DIN rail and panel housing variants, it ensures seamless installation in field and control cabinet environments. Its robust design and intuitive touch control make it ideal for versatile applications in the Water & Wastewater sector and utility operations across all industries.

FlexView FMA90 is suitable for a wide range of applications:

  • Open channel flow under changing weather conditions
  • Rake control with occurring suspended solids or sediments
  • Pump control in narrow installation conditions
  • Storm water basin in remote measuring locations
  • Nov 11, 2025 - Endress+Hauser FlexView FMA90 - Control Unit for Level & Flow Measurement 1
  • Nov 11, 2025 - Endress+Hauser FlexView FMA90 - Control Unit for Level & Flow Measurement 1
  • Nov 11, 2025 - Endress+Hauser FlexView FMA90 - Control Unit for Level & Flow Measurement 1

    • Benefits

    • Flexible use with up to two level sensors across multiple technologies
    • High cybersecurity due to integrated software features
    • Remote access to hard-to-reach measurement points thanks to Wi-Fi connectivity
    • Ease of use thanks to intuitive 3.5″ color display with touch control operable with gloves
    • Fast commissioning with guided setup sequences, tutorials and automatic sensor detection

    Specifications

    • Measuring Principle: Hydrostatic Pressure
    • Characteristic: Level, pump control, open channel flow measurement, data logging
    • Supply Voltage: 100 … 230 VAC; 10.5 … 32VDC
    • Ambient Temperature: -40 to +60 °C (-40 to +140 °F) (Type tested); -35 to +60 °C (-31 to +140 °F)
    • Communication: HART
    • Certificates / Approvals: CSA, ATEX, EAC, JPN Ex, NEPSI, INMETRO
    • Specialities: Degree of protection of polycarbonate field housing; and aluminum field housing: IP65/NEMA Type 4x; Degree of protection of DIN rail housing: IP20; Degree of protection of panel housing: IP65/NEMA Type 4 (at front; if mounted in cabinet door), IP20 (at rear, if mounted in cabinet door); sensor recognition and parameter mapping of FMR10B/FMR20B/FMR30B/FMX21 sensors

    For more information on Endress+Hauser’s FlexView FMA90 HERE

    Endress+Hauser FlexView FMA90 - Control Unit for Level & Flow Measurement

    Source

    Related Articles

    Changing Scene

    Sponsored Content
    The Easy Way to the Industrial IoT

    The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

    Visit Weidmuller’s Industrial IoT Portfolio.

    ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

    Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

    Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

    Read More

    Service Wire Co. Announces New Titles for Key Executives

    Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

    Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

    Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

    Read More

    Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

    Tri-Mach Elmira Facility

    Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

    Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

    Read More

    JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

    Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

    Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

    Read More

    Latest Articles

    • Why Canadian-Made ABB Installation Products Are a Smart Choice for Contractors

      Why Canadian-Made ABB Installation Products Are a Smart Choice for Contractors

      When you’re on-site and under pressure to finish a job, the last thing you need is unreliable product availability or questionable code compliance. That’s why more electrical contractors across Western Canada are turning to ABB’s Made-in-Canada installation products. Featured in ABB’s video, these products are engineered in Canada for Canadian environments — and backed by the quality… Read More…

    • Simplify Your Motor Control Center Configuration, Monitoring & Maintenance

      Simplify Your Motor Control Center Configuration, Monitoring & Maintenance

      Setting up and operating motor control centers (MCCs) is a complex and demanding task. Engineers can encounter time-consuming manual configuration, limited system visibility and troubleshooting delays. Plus, safety concerns, unplanned downtime and difficulty scaling or updating MCC systems can further complicate the picture. Obstacles not only reduce productivity but also increase the risk of errors.… Read More…