Siemens Launches Depot360: Zero-Emission Fleet Operations Solution in Canada

May 8, 2024

  • Depot360 portfolio simplifies fleet electrification with two new offerings: Depot360 Managed Services and Depot360 Charging-as-a-Service (CaaS)
  • Fleet performance, energy costs and sustainability objectives are optimized using the Depot360 AI energy and charging management platform
  • Roughly half of the software research & development for the Depot360 AI platform is being done in Canada, helping position Canada at the forefront of fleet electrification

“Siemens is committed to helping Canadian customers manage and simplify their fleet electrification with innovative solutions, including locally-developed software.”

Faisal Kazi, President and CEO, Siemens Canada

With transportation being the second biggest emitter of greenhouse gases and road transport responsible for almost three quarters of these emissions globally*, Siemens Smart Infrastructure has launched Depot360, a portfolio to optimize fleet electrification. The initial focus of the solution is on logistics vehicles, municipal transit and private bus fleets within depot, warehouse, and terminal facilities. Canada is among the first countries to offer Depot360 to customers, alongside the US, Germany, France, UK, Sweden, and Norway.

“The electrification of transportation is complex and requires a growing system of partners to tackle this enormous challenge,” says Faisal Kazi, Siemens Canada CEO. “Siemens is committed to helping Canadian customers manage and simplify their fleet electrification with innovative solutions, including locally-developed software.”

Siemens Launches Depot360: Zero-Emission Fleet Operations Solution in Canada

The two initial offerings from the Depot360 portfolio are Depot360 Managed Services and Depot360 CaaS.

Depot360 Managed Services optimizes charging and fleet infrastructure operations to maximize fleet performance, lower energy costs, reduce cost-per-kilometer and meet sustainability goals. To enable the Managed Services offering, Siemens has developed the Depot360 AI Platform. Approximately half of the employees developing this software are based in Canada.

Using this platform and its algorithms, a team of Siemens experts monitors and manages the charging infrastructure and fleet performance. Risks are proactively identified and resolved to improve fleet operations. Depot360 aims to guarantee charging station uptime and vehicle state-of-charge (SoC) for route completion.

Depot360 Managed Services will also help customers reduce energy costs with load-shifting (charging at off-peak, less expensive hours), and peak-shaving (schedule-based load management) capabilities. In future, participating fleets will be able to provide their DERs (Distributed Energy Resources) to wholesale markets for further energy cost savings.

Thanks to telematics partnerships with companies such as Geotab, Siemens accesses near real-time connected vehicle data to further improve fleet operations. Siemens is pleased to have joined the Geotab Sustainability Alliance, a group of solution and service providers offering integrated solutions to help fleets operate efficiently and reduce their carbon footprint.

“We are thrilled to work with Siemens towards our shared goal of derisking the scaling of EV infrastructure for fleets,” said Eric Mallia, Geotab’s Vice President of Sustainability Solutions. “Together with Geotab’s leading EV telematics capability, Siemens Depot360 will help ensure that vehicles are properly charged when needed, while also optimizing charging schedules to minimize costs and carbon emissions.”

For customers looking for a one-stop-shop for fleet electrification, Siemens offers Depot360 CaaS. This is a zero-upfront investment solution encompassing consulting, depot design, construction, commissioning, and equipment – all financed into a single monthly payment. Routed in intelligent planning, all requirements are addressed in the solution, including fleet size and scope, grid connection, charging infrastructure, software, and ongoing maintenance, ensuring a future-proof solution to customer needs. With Depot360 CaaS, customers will also enjoy all the benefits of Siemens’ Managed Services.

Source

Related Articles


Changing Scene

  • Intralec Announces Leadership Transition in Northern GTA Sales Region

    Intralec Announces Leadership Transition in Northern GTA Sales Region

    Intralec has announced an upcoming leadership transition as Cameron Slade, currently Warehouse Supervisor, steps into the role of Outside Sales Representative for the Northern GTA region and North Ontario. Cameron will be filling in for Beverly Pisco, who will be beginning her maternity leave this June. Cameron brings a strong foundation in the electrical industry,… Read More…

  • Specialized Power Solutions Welcomes Jonathan Udy as New Sales Manager

    Specialized Power Solutions Welcomes Jonathan Udy as New Sales Manager

    Specialized Power Solutions is excited to welcome Jonathan Udy to their team! Jonathan joins Specialized Power Solutions with over a decade of experience in the electrical industry, beginning his career as a Journeyman Electrician working across commercial and industrial projects. He later transitioned into power distribution sales with ABB, where he spent over six years… Read More…


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Festo: Machine Safety – Why It Matters & How to Achieve It

    Festo: Machine Safety – Why It Matters & How to Achieve It

    For OEMs, machine builders, engineers, and plant managers, machine safety is more than regulatory compliance; it’s a responsibility to workers, a commitment to customers, and a strategic advantage. Every machine on the factory floor has two sides: its potential to drive productivity, and its potential to cause harm. Striking the right balance between performance and… Read More…

  • What Does Being a Gold Level Rockwell System Integrator Mean for Actemium Canada Clients?

    What Does Being a Gold Level Rockwell System Integrator Mean for Actemium Canada Clients?

    What does being a Gold Level Rockwell System Integrator mean to Actemium Canada clients? The obvious answer is that Actemium Canada brings a high level of expertise, knowledge, and experience to every project. But it also means added value in ways many people may not realize, including cost savings on hardware and an extended 3-year… Read More…