| | | | | |

Brady: 4 Steps to Building a Scalable Manufacturing Traceability System

Nov 16, 2026 - Brady 4 Steps to Building a Scalable Manufacturing Traceability System

November 16, 2026

Manufacturing Traceability Systems: Build a Complete Traceability System That Can Adapt to Evolving Needs

Manufacturing traceability and part marking are essential to industrial manufacturing. Consumers, regulatory agencies and your own partners demand greater transparency throughout the entire supply chain, so to remain competitive, you need to enhance operational efficiency and quality assurance metrics.

Building an end-to-end, large-scale traceability system can be time consuming and expensive. It might require significant changes to your entire manufacturing process. Some organizations choose this full teardown to fast-track deployment to meet their short-term goals, but many others choose take a measured, stepped approach to avoid disruption.


Want Big-Impact Traceability? Start Small

Staying competitive in your market by implementing a part traceability system doesn’t need to be an all-or-nothing process. It all starts small, with an infrastructure that can expand incrementally as you decide to grow your track and trace capabilities. Many manufacturers find success when they take a bottom-up approach to traceability implementation. The process begins at the lean cell level and then scales up. Successful implementation at a smaller level provides the blueprint for an entire system.

As they expand their system – adding laser or pin marking machines to other operations areas, incorporating laser marking software and integrating a database via EtherMark – they expose more of their manufacturing process to traceability. Over time, they can build a complete traceability system that can adapt to their evolving needs.


Stop, Review, Strategize

To get the most value out of your traceability system, consider your big-picture goals. The solution you’re building needs to serve your short-term needs but also grow with your organization over time.  

Here are a few things to consider:

  • What are your long-term operational goals?
  • What are the trends that could change how your product is made?
  • Are there any new manufacturing regulations or standards you will have to comply with?
  • What changes will happen within your supply chain that could impact how your product is transported or distributed?
  • How are the needs of your customers changing?
  • Do you anticipate any major changes within your organization?

No one knows exactly what the market will look like or what new technology will emerge, but introducing flexibility to your system lets you change as needed.


Implementing a Scalable Track and Trace System in 4 Steps

Once you have determined your long-term needs with regards to traceability, it’s time to start designing your system. The road to building a foundation for a more successful and connected traceability infrastructure is based on four steps:

  1. Determine what identifying information should be marked on the part.
  2. Select the best marking equipment for the product environment and part lifecycle.
  3. Integrate vision technology to verify accuracy and grade marks.
  4. Enable industrial data and analytics by integrating marking equipment with enterprise software.

1. Determine What Identifying Information Should Be Marked on the Part

The first step to traceability is deciding what information is needed to identify parts. Parts can be identified in a number of ways, including model or batch number, manufacturing date, etc. However, serialization – or assigning a unique identifier (UID) to each unit – is what allows critical information to be accessible within the enterprise software.

Once the coded information is defined, it is typically displayed as either a 1D linear barcode or a 2D Data Matrix. The latter is preferred for traceability because it can store a greater amount of information with a smaller footprint. Additionally, 2D Data Matrix codes have redundancies so that part of the mark could be covered or destroyed and it would retain its readability.

2. Select the Best Marking Equipment for the Product Environment and Part Lifecycle

Once the identification method is defined, it’s time to choose the right marking technology. Materials, the manufacturing process, and enterprise integration all play into the type of marking equipment to choose.

3. Integrate Vision Technology to Verify Accuracy and Grade Marks

A vision system enables tracking, sorting, and identifying through part type, orientation and mark area recognition, mark grading, and defect detection.

This stage is critical for complete traceability for two key reasons:

  1. It ensures that the right data is going to be marked on the right part
  2. It confirms there were no errors in the marking process.

The reading and verification processes work by:

  1. Verifying that the barcode information is correct and preventing serial number duplication
  2. Grading barcode quality to ensure the durability of traceability data
  3. Logging barcode information into a database
  4. Automating processes by scanning barcodes at critical points in the manufacturing process

4. Enable Industrial Data and Analytics by Integrating Marking Equipment with Enterprise Software

A part is marked with a barcode using the appropriate marking equipment, and a vision system is integrated. Now, the final step takes manufacturers beyond merely identifying parts to implementing a complete track and trace system.

It starts with connecting marking equipment with enterprise software, allowing traceability information to flow back and forth. Though there are various levels of connectivity, this integration process can be done through one of two main ways, depending on your existing manufacturing system:

  1. Manually (operator driven) via a PC
  2. Automatically via a PLC (Programmable Logic Controller)

While direct integration with a database is possible using a PC with a custom graphical user interface (GUI), the more common approach is to tap into the factory automation network and remove the PC from the factory floor. This is achieved by integrating the marking system with a programmable logic controller (PLC).

For manufacturers using PLCs, automated integration is more effective because most of their factory equipment communicates through EtherNet/IP. Historically, marking systems have not been able to communicate this way, instead requiring proprietary Application Programming Interfaces (APIs) that included hours of custom programming.


Ready to Start Building Your System?

Your operation is unique and requires a marking and traceability strategy that fits your operational and business goals. An incremental, scalable approach starts with a solid foundation. From here, you can continue to improve your processes and expand your traceability initiative.

Best of all, you can implement it at your own pace.

Brady experts have years of expertise in marking and traceability system integration. Connect with them to get started HERE.

For more information on Brady solutions HERE

Nov 16, 2026 - Brady 4 Steps to Building a Scalable Manufacturing Traceability System

Source

Related Articles


Changing Scene


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • Brady: 4 Steps to Building a Scalable Manufacturing Traceability System

    Brady: 4 Steps to Building a Scalable Manufacturing Traceability System

    Manufacturing traceability and part marking are essential to industrial manufacturing. Consumers, regulatory agencies and your own partners demand greater transparency throughout the entire supply chain, so to remain competitive, you need to enhance operational efficiency and quality assurance metrics. Building an end-to-end, large-scale traceability system can be time consuming and expensive. It might require significant… Read More…

  • WAGO: CAGE CLAMP – The Connection Technology That Changed Industrial Wiring

    WAGO: CAGE CLAMP – The Connection Technology That Changed Industrial Wiring

    Nearly 50 years after its introduction, WAGO’s universal spring-pressure technology continues to influence electrical connection reliability, installation efficiency, and equipment design. A single loose electrical connection can stop a production machine, disable a control system, or send a technician searching through hundreds of terminations for the source of a fault. In equipment containing hundreds or… Read More…