| | | |

Discover Mersen’s New Generation of 1000 VDC Fuse Solutions for Electric Vehicles

August 12, 2026 - Discover Mersen’s New Generation of 1000 VDC Fuse Solutions for Electric Vehicles 2

August 12, 2026

1000 VDC Fuse Solutions: Driving Ahead for Performance & Sustainability

Mersen has enhanced its 1000 VDC fuse platform for electric vehicle applications, delivering improved technical performance while helping reduce the total cost of ownership. Designed to meet the evolving demands of modern e-mobility systems, the new generation of EV fuses provides advanced circuit protection, increased reliability, and optimized system efficiency.

Mersen’s New Generation of MEV Fuses

Mersen stands at the forefront of electric mobility, continuously innovating to drive the industry forward with sustainable, reliable, and efficient solutions for electric vehicles. Beyond delivering high-performance products, Mersen leverages its extensive expertise to help customers optimize their electrical architectures and achieve greater system efficiency.

As part of this commitment, Mersen is getting ready to launch the second generation of its MEV fuse series.

The technical requirements of electric vehicle electrical systems are evolving at an unprecedented pace. Higher power densities, increased performance expectations, and rapidly changing vehicle architectures demand advanced circuit protection solutions capable of meeting these new challenges. Fuse technology must evolve just as quickly to ensure optimal protection, reliability, and performance.

The new generation of MEV fuses has been specifically engineered to address these emerging requirements, delivering enhanced technical performance while helping reduce the total cost of ownership for electric vehicle manufacturers.

Discover their new MEV series below and learn how Mersen is helping shape the future of electric mobility.

  • August 12, 2026 - Discover Mersen’s New Generation of 1,000 VDC Fuse Solutions for Electric Vehicles 2

Key Features & Benefits of This New Platform

1000V-DC: 40A – 150A 

This series is mainly used to protect auxiliaries in the vehicles.

Technical Data Overview:

Rated Voltage DC (IEC) 1000VDC at 20uH 
Ampere Range (A) 40 – 150A 
I.R. DC 30kA 
MBC 2xIn 
Operating Temperature Range -40°C to 125°C 
Open State Resistance > 1 MΩ 
August 12, 2026 - Discover Mersen’s New Generation of 1,000 VDC Fuse Solutions for Electric Vehicles 2

1000V-DC: 150A – 800A

This series is mainly used to protect auxiliaries, traction inverter, DC charging and battery pack in the vehicles. 

Technical Data Overview:

Rated Voltage DC (IEC) 1000VDC at 40uH 
Ampere Range (A) 150 – 800A 
I.R. DC 50kA 
MBC 3xIn 
Operating Temperature Range -40°C to 125°C 
Open State Resistance > 1 MΩ 
August 12, 2026 - Discover Mersen’s New Generation of 1000 VDC Fuse Solutions for Electric Vehicles 2

1000V-DC: 600A – 1100A 

This series is mainly used to protect charging path from Ultra-Fast to Megawatt Charging in the vehicles.

Technical Data Overview:

Rated Voltage DC (IEC) 1000VDC at 20uH 
Ampere Range (A) 600 – 1100A 
I.R. DC 25kA 
MBC 3xIn 
Operating Temperature Range -40°C to 105°C 
Open State Resistance > 1 MΩ 
August 12, 2026 - Discover Mersen’s New Generation of 1,000 VDC Fuse Solutions for Electric Vehicles 2

For more information on Mersen solutions HERE

August 12, 2026 - Discover Mersen’s New Generation of 1000 VDC Fuse Solutions for Electric Vehicles 2

Source

1000 VDC Fuse 1000 VDC Fuse

Related Articles

Changing Scene

  • Weidmüller Canada Is Growing Their Team & Investing in the Future of Engineering

    Weidmüller Canada Is Growing Their Team & Investing in the Future of Engineering

    Weidmüller Canada is growing their team and investing in the future of engineering. They are proud to welcome Ada Santavy, Laura Cochrane, and William Watson, the newest hires of Weidmüller’s Engineering Launchpad Program, an innovative initiative that combines technical and soft skills training, mentorship from industry veterans, and hands-on project experience to develop well-rounded engineering… Read More…

  • Leviton Canada Announces Jim Hartery as New Territory Manager, Alberta

    Leviton Canada Announces Jim Hartery as New Territory Manager, Alberta

    Please join Leviton Canada in welcoming Jim Hartery to their team! Jim brings extensive experience in sales and account management within the electrical industry, along with a proven track record of building strong customer relationships, developing new business opportunities, and driving growth across both new and existing accounts. Leviton is thrilled to have Jim on… Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Techspan: Automotive Circuit Protection Products – A B2B Buyer’s Guide for Distributors

    Techspan: Automotive Circuit Protection Products – A B2B Buyer’s Guide for Distributors

    Automotive circuit protection is not a one-size-fits-all category, especially for distributors supplying repair shops, fleet operators, OEM channels, aftermarket installers, and industrial buyers. A part that works in one vehicle or electrical setup may not suit another, even when the category looks similar at first glance. For distributors, the real challenge is building stock that supports replacement demand, resale confidence,… Read More…

  • Texcan: Teck, Vertical Riser & AIRGUARD – Cable Solutions for Demanding Environments

    Texcan: Teck, Vertical Riser & AIRGUARD – Cable Solutions for Demanding Environments

    Teck, Vertical Riser Teck, and AIRGUARD address distinct installation needs for industrial and vertical-riser installations. Each product targets specific installation needs: Teck for general industrial feeders, Vertical Riser Teck for continuous vertical runs, and AIRGUARD to deliver high crush resistance and corrosion protection on long runs. Understanding the differences in application can help ensure the right cable is selected… Read More…