April 27, 2026 PSP6200 & PDP6200: Siemens SITOP Introduces the New IP65‑Rated, 3‑Phase Power Solutions Siemens SITOP introduces the new IP65‑rated, 3‑phase power solutions: the PSP6200 power supply and the PDP6200 with integrated selectivity module. This webinar will provide a technical overview of each product, their key features, and how they integrate into the broader…
HANNOVER MESSE brings together international experts, investment decision-makers, and users. With visitors from over 150 countries, the trade fair offers the largest platform for industrial transformation. Exhibitors gain reach, high-quality contacts, and access to markets that would otherwise be difficult to reach, along with excellent innovations or unusual products. Here you will find all the facts that make one thing even clearer: participation is an absolute “must”!
The Lumen Exhibition is the largest exhibition of the electrical industry in Quebec with an area of 50,000 ft2 with more than 175 exhibiting manufacturers. This unique and innovative event offers in one place the opportunity to discover products and new developments in the industry as well as the possibility of interacting with their supplier specialists. The next major exhibition will take place on April 15th and 16th, 2026, from 9 a.m. to 6 p.m. at the Palais des congrès in Montreal.
Employing a highly efficient table-top format, the DEX Expo is a one-day regional table-top tradeshow where engineers, product developers, machine builders and systems integrators can discuss, network, and solicit advice on the latest technologies and applications that drive their businesses. Meet face-to-face with product and application engineers who know their stuff and get hands-on experience with the products and solutions displayed.
The NGen N³ Summit brings together Canada’s advanced industries under one roof. Automation, AI, robotics, quantum, defence, homebuilding, and more. If it’s shaping the future, it’s here. This summit is built for decision-makers and doers. For those who are scaling businesses, driving investment, designing policy, and building real technology. Whether you’re here to discover, pitch, learn, or lead, N³ offers a rare space where Canadian industrial innovation moves faster. Located at the Metro Toronto Convention Centre, North Building, Hall A.
The Canadian Mechanical and Plumbing Expo (CMPX) is Canada’s major industry event for HVACR and plumbing professionals. Held every two years, CMPX brings together the entire value chain — from manufacturers, contractors, and wholesalers to engineers, architects, educators, and students — to innovate, explore, connect, and learn. CMPX is proudly co-produced by the Heating, Refrigeration and Air Conditioning Institute of Canada (HRAI) and the Canadian Institute of Plumbing & Heating (CIPH). Together, these associations represent decades of leadership, advocacy, and technical expertise, ensuring CMPX remains a must-attend event for professionals across the mechanical and plumbing industries. The next CMPX takes place March 25–27, 2026 at the Metro Toronto Convention Centre, South Building.
The Alberta Electrical Alliance (AEA) is proud to gather the electrical industry in Edmonton and area for their annual Learning EXPO that travels Alberta. Event is free of charge however registration is required. Don’t miss out on your exclusive opportunity at this ONE-DAY event to stay ahead in the ever-evolving electrical industry! Discover the latest advancements in technology and services powering the vibrant electrical industry. This is your chance to connect with experts, explore cutting-edge solutions, and gain insights from industry leaders. For one day only — don’t miss out on this exclusive opportunity to stay ahead in the ever-evolving electrical field!
The MEET (Mechanical Electrical Electronic Technology) Show is making its highly anticipated return to the Moncton Coliseum Complex this Spring, May 6th through 7th. This biennial two-day event features over 400 companies from the mechanical, plumbing, electrical, lighting, DataCom and automation industries. Featuring the latest equipment, products, and technology on the horizon, 2026 will be the twenty-sixth edition of this key trade event. You can expect to see cutting-edge innovations, informative seminars, and engage in unique networking opportunities with industry leaders. Don’t miss your chance to join thousands of fellow industry professionals and see what lies ahead in your sector.
Schneider Electric EcoStruxure is a unique software platform to increase design, productivity and performance of your Modicon M340, M580, M580 Hot Standby, M580 Safety, Quantum, and Momentum. It opens doors to a complete range of new functions for improved productivity and collaboration. With the addition of the 984LL, migrations from any Modicon platform are possible with a simple conversion. Your software investment is maximized, training costs are reduced, and you benefit from unequalled development and compatibility potential.
In this informative and interactive session, NOARK will open the doors to the world of Variable Frequency Drives (VFDs) — the key to achieving greater energy efficiency, precision, and performance in modern electrical systems. Join NOARK and explore what makes VFDs essential in industries such as HVAC, manufacturing, mining, pumping, and renewable energy. You’ll learn how these innovative devices control motor speed and torque by adjusting frequency and voltage, allowing you to optimize processes, reduce energy costs, and extend equipment life.
Advanced Design & Manufacturing Toronto brings together six advanced manufacturing areas — design, automation, packaging, plastics, processing, and EV technology. This all-in-one, industry-wide event lets you explore the latest trends and technologies shaping the future in advanced design and manufacturing. Through hours of conference content, hundreds of exhibitors, and networking opportunities with over 6,000 fellow attendees, ADM Toronto is the platform propelling Canada’s manufacturing industry forward.
CMTS 2025 isn’t just another trade show—it’s Canada’s most strategic B2B event for the manufacturing sector. Backed by industry leaders and trusted by innovators, CMTS brings the entire ecosystem together to spotlight the technologies reshaping production across the country. From next-gen machinery and advanced automation to 3D printing, precision engineering, and future-forward tech, CMTS is where Canada’s manufacturing momentum is made. If you’re serious about the future of Canadian industry, this is the one event you can’t afford to miss.
Electromate is pleased to announce its biennial Fall SPARK Symposiums (Showcasing Precision and Robotic Knowledge), scheduled for October 28, 2025, in Waterloo, Ontario, and October 30, 2025, in Montreal, Quebec. The symposiums will feature a tabletop show format accompanied by classroom presentations focusing on robotics and mechatronics. Attendees will have the opportunity to engage with leading manufacturers. These complimentary events are tailored for OEMs, machine builders, system integrators, and engineering students. Sorry, no competitors, please.
Join Panduit for an insightful webinar on the transformative benefits of structured cabling for AI data centers. This session will be led by Bob Wagner, Sr. Business Development Manager at Panduit, who will share his expertise on the role of structured cabling in meeting the high-performance and low latency demands of AI workloads. Participants will gain valuable insights into the best practices for designing and implementing structured cabling systems that ensure peak performance, scalability, and reliability in AI data centers.
As a trusted partner in Industrial Connectivity, Weidmüller understands that panel building is more than just components—it’s a seamless, integrated process from planning through to installation and operation. That’s where the Weidmüller Configurator (WMC) comes in. This powerful software solution is designed to support you at every stage of your panel building journey, offering efficiency, accuracy, and flexibility. Join for an exclusive webinar session with Russell Ramos, Custom Service Assembly Team Lead, and discover how WMC can simplify and accelerate your panel design process.
German Technology Day brings together prominent companies in automation and advanced manufacturing, with their headquarters in Germany. This annual trade show and conference will feature an exhibit hall open all day, congruent presentations, and an exciting Innovation Hub featuring the latest technology from the exhibitors. Whether you are a Design Engineer, Technician, System Integrator, Panel Builder, or Supply Chain Professional, this is your opportunity to connect with cutting-edge technologies and the minds behind them. Let’s shape the future of technology—together.
This project is funded [in part] by the Government of Canada.
Ce projet est financé [en partie] par le gouvernement du Canada.
