XP Power: Launching 100W AC-DC Power Supplies For Industrial, Technology & Medical Devices, Including BF

PB-54-XP-FCB100PowerSupplies-400.jpg

February 3, 2022

Introducing the FCB100 series of AC-DC power supplies. The series is certified to medical (including BF), ITE and household standards for Class I and II (no ground connection) operation. With Class B conducted and radiated emissions in both Class I & Class II configurations and supporting both convection & fan cooled applications the open frame modules are ideal for medical, home healthcare, test & measurement, broadcast, networking, communications, and other industrial equipment.

All models in the FCB100 series accept a wide operating input voltage range of 80 to 264VAC, supporting worldwide compatibility & home healthcare applications, and have a no-load power consumption of less than 0.3W. A choice of six standard output voltages is available: 12V, 15V, 19V, 24V, 36V, and 48VDC. 

The FCB100 series operates in ambient temperatures from -25°C to +70°C. With external forced air cooling, the units deliver 100W at up to +50°C, derating linearly to 50W at +70°C. The units can be convection-cooled for low audible noise, delivering 80/85W at up to +50°C, derating linearly to 40/45W at +70°C depending on the model. The open frame models measure 101.6mm x 50.8mm x 31.8mm (4” x 2” x 1.25”) and weigh 160g (0.35lbs). In addition, the products include overvoltage, overload, short circuit, and overtemperature protection as standard.

The input to output isolation is 4,000VAC (2 x MOPP), input to ground 1,500VAC (1 x MOPP), and output to ground 1,500VAC (1 x MOPP) combined with low leakage current for suitability in BF rated medical devices. Safety certifications include IEC/ES/EN 60601-1, IEC/UL/EN 62368-1, IEC 60950-1, and IEC 60335. The products also comply with EN55035 & & IEC 60601-1-2 ed.4 EMC standards. 

The FCB100 series are available from Digi-Key, Distrelec, Farnell, Mouser, RS Components, approved regional distributors, or direct from XP Power and offer a 3-year warranty. 

Source

Related Articles


Changing Scene


Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.


ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More


Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More


Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More


JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More


Latest Articles

  • M12 Cables: Enhancing Connectivity Across Industries

    M12 Cables: Enhancing Connectivity Across Industries

    Delivery, reliability, and selection; are three criteria that best describe Proax’s commitment to offering optimal options for in-stock connectivity. In partnership with Phoenix Contact, customers can expect a large range of solutions designed for the safe transmission of signals and power. M12 cables are a type of circular connectors commonly used in industrial automation, ethernet networking, fieldbus… Read More…

  • Record-Breaking Automate 2024 Event Highlights Industry’s Rapid Growth and Innovation

    Record-Breaking Automate 2024 Event Highlights Industry’s Rapid Growth and Innovation

    The largest robotics and automation trade show in North America, Automate, achieved unprecedented success last week with record-breaking attendance and exhibitor participation. 42,895 registrants from around the globe convened at Chicago’s McCormick Place from May 6-9, 2024, to explore the latest advancements in robotics, artificial intelligence and automation technologies. Read More…