| |

Endress+Hauser: FLOWSIC900 Ultrasonic Flowmeter

May 21, 2025 - Endress+Hauser_ FLOWSIC900 Ultrasonic Flowmeter 2

May 21, 2025

FLOWSIC900: Custody Transfer Ultrasonic LNG Meter

FLOWSIC900 is the result of Endress+Hauser’s many years of experience in natural gas measurement: a flowmeter specially tailored to the requirements of the LNG industry. It offers the required custody transfer accuracy for volume flow measurement and meets highest metrological standards. With FLOWSIC900 and the proven products FLOWSIC600-XT and FLOWSIC100 Flare-XT, Endress+Hauser offer high-quality measurement solutions from a single source to bring measurement performance and reliability in LNG plants to a new level.

  • Custody transfer measurement of LNG
  • On and offshore applications
  • Liquefaction, transport and storage of LNG

Device Properties:

  • Intrinsically safe and reliable ultrasonic transducers
  • Conform to OIML R117 Cl. 0.3 and API MPMS Ch. 5.8
  • Real time measurement and diagnostics
  • Full bore design without pressure drop or need for flow conditioner
  • Factory thermal pre-insulation
  • Remote Signal Processing Unit
  • -EndressHauser_-FLOWSIC900-Ultrasonic-Flowmeter
  • -EndressHauser_-FLOWSIC900-Ultrasonic-Flowmeter
  • May 21, 2025 - Endress+Hauser_ FLOWSIC900 Ultrasonic Flowmeter 2

FLOWSIC900 Benefits

  • Low measurement uncertainty directly at custody transfer point reducing financial risks during LNG-transaction
  • Increased transparency during LNG transaction by dynamic & real-time measurement & diagnostics
  • Easy and fast access during commissioning and regular checks with remote SPU
  • Operational expenditure savings by reduced boil-off gas losses and efficient LNG transfer due to minimized pressure drop
  • Capital expenditure savings by simplified meter integration and installation due to compact design and factory pre-insulation

Specifications

  • Measuring Principle: Ultrasonic transit time difference measurement
  • Measured Variables: Volume a. c., volumetric flow a. c., Fluid velocity, Speed of sound
  • Measuring Medium: LNG (Liquefied Natural Gas)
  • Repeatability: ≤ ± 0.05 % of the measured value
  • Accuracy: Typical error limits Qmin … Qmax ≤ ±0.2 % of reading after flow calibration and adjustment
  • Operating Pressure Range: 0 bar (g) … 19 bar (g) / 0 psi(g) … 275 psi(g)
  • Nominal Pipe Size: 8 ″ … 36 ″ DN200 … DN900, Schedule 40S/STD acc. ASME B36.19 / B36.10, others on request
  • Digital Outputs: 2 Digital output/Frequency output – Others on request
  • Digital Communication: Modbus RS-485 (2x), Modbus RTU/ASCII, Bluetooth, USB
-EndressHauser_-FLOWSIC900-Ultrasonic-Flowmeter

Source

Related Articles

Changing Scene

  • MacKinnon Magnetics Announces Resilient Sales Corporation as Their Newest Sales Agency Partner

    MacKinnon Magnetics Announces Resilient Sales Corporation as Their Newest Sales Agency Partner

    MacKinnon Magnetics is pleased to welcome Resilient Sales Corporation as their newest sales agency partner. Resilient Sales will represent MacKinnon Magnetics across Northeastern Ontario, including the Districts of Muskoka and Parry Sound. Key markets include Sudbury, North Bay, Timmins, Kirkland Lake, Sault Ste. Marie, Huntsville, Bracebridge and Parry Sound. This partnership expands MacKinnon Magnetics regional… Read More…

  • Canada Controls Announces the Grand Opening of Their New Edmonton Branch

    Canada Controls Announces the Grand Opening of Their New Edmonton Branch

    Canada Controls is excited to officially celebrate the Grand Opening of their new branch in Edmonton, Alberta! Join them on September 10th from 10 AM–4 PM as they welcome customers, partners, and friends to their newest location. Come meet the team, connect with their industry partners, and enjoy some great food. Most importantly, Canada Controls… Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Electromate: Spring Applied & Power-Off Permanent Magnet Brakes – Engineering Failsafe Motion Control

    Electromate: Spring Applied & Power-Off Permanent Magnet Brakes – Engineering Failsafe Motion Control

    Most electromagnetic brakes work on a simple logic: apply current, apply braking. Remove current, release braking. For many industrial applications, conveyors, packaging lines, printing machines, this is exactly the right behavior. The brake engages on demand and releases when not needed. But for a significant class of machines, this logic is exactly backwards. Robots, vertical… Read More…

  • ITC 101 Series: Why Certifications (UL, CSA) Matter in Industrial Components

    ITC 101 Series: Why Certifications (UL, CSA) Matter in Industrial Components

    When selecting industrial electrical components, certification is more than a logo on a datasheet. A certification mark indicates that a product or component has been independently evaluated against specified requirements for its intended market. In North America, selecting products with the appropriate certification can affect regulatory acceptance, equipment certification, inspections and project completion. The key… Read More…