EPLAN Data Portal Update 01 September 2023

September 13, 2023

In this update of the EPLAN Data Portal, there are now a total of 463 manufacturers and more than 1,500,000 data sets available with the update September 7, 2023.

New manufacturer catalogs for Data Portal

  • Katko Oy – 289 new data sets with generals, protection devices and terminals
  • Laumas Elettronica S.r.l. – 11 new data sets with measuring instruments and test devices
  • YUEQING DAHE ELECTRIC Co., Ltd. – 4,440 new data sets with sensors, switches and pushbuttons

Data Portal updated and new data

  • ABB LTD – 50 new and 78 updated data sets with generals, relays, contactors
  • Banner Engineering Corporation – 50 new data sets with signal devices, sensors, switches and pushbuttons
  • Baumer Holding AG – 67 new data sets with industrial camera
  • BLOCK Transformatoren-Elektronik GmbH – 23 updated data sets with transformers
  • Danfoss Drives A/S – 19 new data sets with converters
  • Eaton Industries GmbH – 406 new and 1,048 updated data sets with power switchgears, sensors, switches and pusbuttons, signal devices
  • ETI Elektroelement d.o.o. – 379 new and 1,194 updated data sets with generals, miscellaneous, protection devices
  • Festo SE & Co. KG – 2 new data sets with PLC
  • Fuji Electric FA Components Co., Ltd. – 36 new data sets with lights, sensors, switches and pushbuttons
  • HARTING Electric GmbH & Co. KG – 1 updated data set with an plug
  • KEBA Group AG – 1 new data sets with converters
  • KEYENCE CORPORATION – 4 new data sets with lights, sensors, switches and pushbuttons
  • Lenze SE – 64 updated data sets with PLC
  • Murrelektronik GmbH – 1,227 new and 174 updated data sets with cables
  • Phoenix Contact GmbH & Co. KG – 1 new and 125 updated data sets with protection devices and terminals
  • Pilz GmbH & Co. KG – 1 new and 22 updated data sets with cables, sensors, switches and pushbuttons
  • J.Schmalz GmbH – 3 new data sets with valves
  • Sick AG – 1,801 new and 9 updated data sets with sensors, switches and pushbuttons
  • TE Connectivity – 132 new data sets with plugs
  • WAGO GmbH & Co. KG – 70 new and 91 updated data sets with PLC, sensors, switches and pushbuttons, terminals, voltage sources and generators
  • Weidmueller Group – 2 new and 21 updated data sets with general, voltage sources and generators

Data Portal Summary

  • 3 new manufacturer
  • 21 updated manufacturer
  • 9,039 new data sets
  • 2,854 updated data sets
  • 0 deleted data sets
  • 7,359 new parts with EDS
  • In total 901,913 parts with EDS
  • In total 311 manufacturers with EDS parts
  • In total 1,500,977 data sets live in EDP

Source

Related Articles

Changing Scene

  • Weidmüller Canada Is Growing Their Team & Investing in the Future of Engineering

    Weidmüller Canada Is Growing Their Team & Investing in the Future of Engineering

    Weidmüller Canada is growing their team and investing in the future of engineering. They are proud to welcome Ada Santavy, Laura Cochrane, and William Watson, the newest hires of Weidmüller’s Engineering Launchpad Program, an innovative initiative that combines technical and soft skills training, mentorship from industry veterans, and hands-on project experience to develop well-rounded engineering… Read More…

  • Leviton Canada Announces Jim Hartery as New Territory Manager, Alberta

    Leviton Canada Announces Jim Hartery as New Territory Manager, Alberta

    Please join Leviton Canada in welcoming Jim Hartery to their team! Jim brings extensive experience in sales and account management within the electrical industry, along with a proven track record of building strong customer relationships, developing new business opportunities, and driving growth across both new and existing accounts. Leviton is thrilled to have Jim on… Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Texcan: Teck, Vertical Riser & AIRGUARD – Cable Solutions for Demanding Environments

    Texcan: Teck, Vertical Riser & AIRGUARD – Cable Solutions for Demanding Environments

    Teck, Vertical Riser Teck, and AIRGUARD address distinct installation needs for industrial and vertical‑riser installations. Each product targets specific installation needs: Teck for general industrial feeders, Vertical Riser Teck for continuous vertical runs, and AIRGUARD to deliver high crush resistance and corrosion protection on long runs. Understanding the differences in application can help ensure the right cable is selected for the… Read More…

  • Mouser: Industrial Ethernet vs Fieldbus – Architecture, TSN & Migration

    Mouser: Industrial Ethernet vs Fieldbus – Architecture, TSN & Migration

    Fieldbuses once replaced bundles of wiring with shared, deterministic networks. For years, they carried control signals reliably and predictably. However, as equipment, sensors, and data systems proliferated, fieldbus limitations emerged. The central issue today is real-time operational visibility. Engineers need networks that move control data, diagnostics, and process information across the plant as reliably as… Read More…