Littelfuse: Uninterruptable Power Supply (UPS) & Energy Storage System (ESS)
Related Articles
Use SMD Fuses to Ease Layout, Reduce Product Size and Enhance Ruggedness
The thermally activated fuse is the oldest circuit protection device and is still in widespread use. It is well understood, reliable, consistent, and approved by regulatory standards. However, with end products increasing in complexity and shrinking in size, designers need an alternative to the user-replaceable fuse and fuse holder in order to reduce the form factor, simplify assembly, improve ruggedness, and further enhance safety.
NOARK: Powering the Future of Data Centers
Amid the surging tide of the digital economy, the data center industry is ready for intelligent and green computing power. In response to this trend, NOARK presents a comprehensive range of data center solutions to support the digital economy. The world of today has become reliant on the power of digital intelligence, and to maintain the storage of all this information, there are over 11,000 public data centers worldwide, with almost 50% of them in North America. This trend will only continue with cryptocurrency, rise of AI, network traffic, and the expansion of the Industrial Internet of Things. Data centers accounted for about 1.5 percent of global electricity consumption in 2024, an amount expected to double by 2030 because of AI use. Due to this large energy demand, a significant number of power distribution components are necessary to provide power to these units. Moreover, Data Centers contain the most sensitive information, which needs to be safeguarded.
B&R Automation: Wireless Transmission of Safety Data
The openSAFETY safety bus protocol can now be transmitted via UDP using the black channel principle. This facilitates the use of wireless transmission technologies for safety communication. openSAFETY can be configured flexibly, making it particularly well suited for wireless data transmission
Out With the Old – How a New Product Design Resulted in a Better Manufacturing Process
The scenario
A local manufacturing company had several high-speed production lines in their facility. After making changes to improve the design of one of their products, the existing system was unable to cure the new materials required by the company. In response, the company began sourcing a curing solution that would be able to bond the materials when they ran the new product.
A Closer Look at Safety Valves and the Value of Performance Level E
Recently we had the chance to learn a little more about some of Festo’s output safety devices, with a focus primarily on the MS6-SV-E Safety Valve. Insight in this was provided from several Festo product specialists and a direct look at safety functions from Randy DeForge, Product Manager, Festo North America.
Rockwell Automation: Improve Electric Arc Flash Safety in Oil & Gas
Motor Control Centers (MCCs) are the technological hubs controlling critical rotating equipment – such as submersible pumps, compressors, and pipeline boosters – across upstream, midstream, and downstream oil and gas operations. Given the enormous energy requirements and often hostile operating conditions characteristic of this sector, motor control centers are ground zero for one of the industry’s most serious electrical safety threats: the electric arc flash.
Changing Scene
-
Intralec Announces Leadership Transition in Northern GTA Sales Region
Intralec has announced an upcoming leadership transition as Cameron Slade, currently Warehouse Supervisor, steps into the role of Outside Sales Representative for the Northern GTA region and North Ontario. Cameron will be filling in for Beverly Pisco, who will be beginning her maternity leave this June. Cameron brings a strong foundation in the electrical industry,… Read More…
-
Specialized Power Solutions Welcomes Jonathan Udy as New Sales Manager
Specialized Power Solutions is excited to welcome Jonathan Udy to their team! Jonathan joins Specialized Power Solutions with over a decade of experience in the electrical industry, beginning his career as a Journeyman Electrician working across commercial and industrial projects. He later transitioned into power distribution sales with ABB, where he spent over six years… Read More…
Sponsored Content
The Easy Way to the Industrial IoT
The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.
Visit Weidmuller’s Industrial IoT Portfolio.
ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line
Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.
Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.
Service Wire Co. Announces New Titles for Key Executives
Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.
Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.
Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.
Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility
Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.
Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.
JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach
Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.
Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.
Latest Articles
-
Festo: Machine Safety – Why It Matters & How to Achieve It
For OEMs, machine builders, engineers, and plant managers, machine safety is more than regulatory compliance; it’s a responsibility to workers, a commitment to customers, and a strategic advantage. Every machine on the factory floor has two sides: its potential to drive productivity, and its potential to cause harm. Striking the right balance between performance and… Read More…
-
What Does Being a Gold Level Rockwell System Integrator Mean for Actemium Canada Clients?
What does being a Gold Level Rockwell System Integrator mean to Actemium Canada clients? The obvious answer is that Actemium Canada brings a high level of expertise, knowledge, and experience to every project. But it also means added value in ways many people may not realize, including cost savings on hardware and an extended 3-year… Read More…
