Industry

  • | |

    EtherCAT Reaches 88 Million Nodes – Strong Growth Despite Difficult Market Conditions

    EtherCAT Technology Group (ETG) now reports around 88 million EtherCAT nodes worldwide and even if the pace of growth in recent years could not be maintained due to the current global economic climate and the after-effects of chip overstocking, the result is impressive: another 11 million EtherCAT nodes were added in 2024 – an outstanding result in a challenging business environment. These node figures are very reliable as they are based on actual chip sales, which are reported by the chip manufacturers to Beckhoff Automation, the inventor of EtherCAT technology. “And they have no interest in exaggerating these figures, as this would entail additional costs for them,” explains Martin Rostan, Executive Director of the EtherCAT Technology Group. With EtherCAT, the technology license is included directly in the chip, so there are no additional license fees for device manufacturers and users. Beckhoff uses the license revenue to finance the activities of the EtherCAT Technology Group and thus the ecosystem surrounding the technology.

  • |

    Guillevin: Hubbell Canada – N12303012 NEMA Enclosure

    The N12303012 NEMA enclosure from Hubbell Canada is intended for use in housing electrical and electronic controls, instruments, components, and associated wiring; these enclosures incorporate hinged doors which provide convenient access. Designed for indoor use in reliably protecting components from dust, dirt, oil, and water. Smooth carbon steel construction with continuously welded seams provides an effective wall-mounting enclosure solution for a variety of environments.

  • |

    Mouser: Amphenol Piher PSRC-2P Angular Position Sensors

    Amphenol Piher PSRC-2P Angular Position Sensors offer touchless sensing for demanding industrial and vehicle environments. The rugged construction and advanced engineering of the sensors provide highly accurate angular measurements in harsh conditions. The magnet and sensor modules are housed separately allowing them to be placed anywhere along the pivoting shaft. The PSRC-2P angular position sensors feature ±10V voltage protection and ±0.3% typical independent linearity in a compact low-profile package. These sensors include customizable electrical angles, multiple output options, and IP-rated protection against dust and moisture. The PSRC-2P angular position sensors are ideal for industrial automation, marine and medical devices, vehicle control systems, and home and building automation.

  • |

    Siemens: Machine Builders – Unlocking New Business Opportunities with Siemens Industrial Edge

    In today’s competitive landscape, machine builders face increasing pressure from low-cost providers and the need to innovate continuously. Siemens Industrial Edge offers a transformative solution, enabling machine builders to enhance their offerings, optimize operations, and create new revenue streams through digital services. Digital services are crucial for machine builders to stay competitive. They provide opportunities to differentiate from global competitors, save internal resources, and increase customer loyalty by offering enhanced knowledge and services.

  • |

    SmartD: SDB-2-2550-A | 3~600V 55kW-75 HP – VFD

    SDB-2-2550-A Clean Power Variable Frequency Drive is a compact AC drive utilizing SmartD’s patented algorithms combined with WBG transistor technology. Producing a clean and pure sine wave to power and control 3-phase AC induction motors has never been easier. The SmartD VFD has essential features built-in for space, wiring and time savings, it eliminates the need for filters on the output, and guarantees longer motor lifetime.

  • |

    Eaton: Wall-Mount & Ground-Mount Fibreglass Panel Enclosures

    Eaton B-Line series wall-mount and ground-mount fibreglass enclosures are designed to house electrical, electronic, instrument and mechanical controls.  They are impact resistant, non-conductive and are made of lightweight hot compression moulded fibreglass reinforced polyester.  They are UL/cUL Listed and conform to NEMA and CSA 22.2 standards. Eaton’s B-Line series large enclosures provide reliable electrical equipment protection for variable frequency drives, motors, controls, electrical devices, and other power distribution equipment.

  • | |

    Rockwell Automation: Why Integrated Architecture Can Be Your One Plant-Wide Control System – 3-Part Webinar Series

    This 3-part webinar series will consist of topics highlighting some of the major value propositions of integrated architecture from Rockwell Automation. The first will focus on the value of unifying process and power control. It will show how leveraging information across disciplines typically controlled by different islands of automation reduces risk, lowers costs, and empowers faster and better business decisions. The series will look to highlight the value of integrated architecture scalability, simplification and productivity.  Attendees will also learn about the latest developments in Logix, as well as the latest developments in our visualization platforms. In totality, these webinars will highlight why consideration of an integrated architecture as your plantwide control system offers unique value, cost savings and productivity enhancements.

  • |

    ITC: NOARK – Contactors, Overloads & Accessories

    NOARK’s range offers 9 models of contactors, with ratings from 9A to 95A (to 30HP @230/240VAC 1-phase – to 50HP @500/675VAC 3-phase). Coil voltages from 24 to 600VAC, 50/60Hz available. All contactors are Full Voltage Non-Reversing (FVNR) standard; FVR available upon request. FVR contactors can be assembled using 2 FVNR contactors, busbars and a mechanical interlock. Features include IP20 finger and back-of-hand safe, wire connection by screw-clamp (accepts solid or stranded wire with or without ferrule). NOARK Overload relays are mounted directly over the corresponding contactors, or on the special DIN rail mounted adapter blocks, beside the contactor. Available in different range of adjustments, for all contactors from 9 to 95A. NOARK Overload relays features include phase failure protection function, temperature compensation, automatic/ manual reset, and tripping indicator. Mounting mode can be plug-in or independent. NOARK accessories include spare AC coils that are available for all sizes of contactors and for every voltage. Replacing a coil is extremely simple and can be done without specialized tools. Replacing a coil does not alter the information appearing on the label affixed on the body of the contactor.

  • |

    LOVATO: VLG30150A480 – Variable Speed Drive, VLG3 Series

    LOVATO Electric expands its range of variable speed drives with the new VLG3 series, including the VLG30150A480 with three-phase power supply 380, 480VAC 50/60Hz. The range includes sizes from 0.4 to 22kW and integrates an EMC filter and a braking chopper as standard. The compact enclosure allows side-by-side installation, with the possibility of mounting on a DIN rail or with screws. On the front of the drive, there is a keypad with a 7-segment LED display for configuration, a potentiometer for frequency adjustment, and an RJ45 connector for connecting peripheral devices such as the optional remote keypad or the cable for PC connection for programming via VLGXSW software. The hardware equipment is completed by the built-in RS485 serial port with Modbus-RTU protocol, for interfacing in a control and supervision network or communication with masters such as PLC or HMI. Alternatively, the drive can be equipped with an Ethernet communication port via an optional Modbus-TCP module that installs on the front. The range is cULus certified, an essential requirement for sale in the North American market.

  • |

    Murrelektronik: MB CAP BUFFER MODULE – 85394

    Murrelektronik’s MB CAP BUFFER MODULE 85394 is a safe, intelligent and cost-effective solution. Voltage drops can cause unpleasant effects: interrupt production processes, cause downtime, and require a system resets. They may even cause data loss and machine damage. Murrelektronik’s buffer modules protect power supplies by bridging the time without power supply or enabling a controlled shut down of machines connected to a PC.

  • |

    NEDCO: ELECTRIPRO – TECK 3 C 6 CU PVC-JKT 1KV Teck 90 Cable

    The TECK 3 C 6 CU Teck cable from Electripro is durable, oil, UV, impact and chemical resistant, has an FT4 fire-rating and is suitable for both hazardous and wet locations. Temperature ratings provide protection from low to high temperature environments, can be utilized for cable trays, exposed run or direct burial making the TECK 3 C 6 CU a versatile and reliable Teck 90 cable option. Meets CSA certification standards.

  • |

    SICK: IMX – Inductive Proximity Sensors

    Significantly greater distances: IMX offers four times the sensing range of conventional sensors, setting a new standard for inductive proximity sensors. Sensing ranges of up to 50 mm ensure a higher process performance – making IMX ideal for applications that were previously inconceivable with inductive sensors. In space-critical applications, IMX sensors save installation space by using smaller designs and at the same time, the greater distance reduces mechanical damage. The rugged, durable design ensures less downtimes, stable processes and high plant availability.

  • |

    Panduit: SteadyPulse Line Interactive UPS, 1.5kVA, Lithium, 120V, NC

    Future-proof operations with continuous, reliable power that adapts to evolving tech demands. Panduit’s compact SteadyPulse UPS with lithium-ion batteries is ideal for smaller-scale IT equipment and offers efficient power protection and high energy density for Data Centers, Enterprises and Edge IT. Panduit UPS Systems deliver top-tier power protection and backup for critical IT gear. Explore the versatile options that the SteadyPulse UPS can provide for a range of applications and industries.

  • |

    Proax: Prevent Costly Downtime – The Critical Importance of Removing Water from Your Factory Air

    At Proax, they understand that unexpected downtime can devastate your production schedule and bottom line. As a reliable distributor of SMC pneumatic solutions, they have seen firsthand how one often-overlooked culprit—water in compressed air systems—can silently undermine your operation’s efficiency. While many manufacturers focus on removing oil and particulate contaminants through standard filtration, water vapor presents a more insidious challenge. A standard 100 hp compressor operating in typical conditions (86°F, 80% relative humidity, 100 psi) can produce a staggering 30 gallons of condensate during a single eight-hour shift.

  • |

    Hammond Manufacturing: Canada’s Colocation Data Center Market

    Canada’s data center colocation market is experiencing rapid expansion, fueled by increasing demand for digital infrastructure, data sovereignty concerns, and the rise of cloud computing. As enterprises and hyperscale providers seek scalable, efficient, and secure solutions, colocation facilities in Canada are evolving to meet the growing needs of businesses while prioritizing innovation and sustainability. Organizations across industries are rapidly adopting cloud computing, AI-driven applications, and big data analytics. This digital transformation necessitates robust data center infrastructure, driving enterprises to seek colocation services that offer reliability, scalability, and connectivity.

  • |

    Inventronics: NEMA 4 / 4x Cabinets & Enclosures

    Inventronics iv-TEQ and iv-TEX Standard NEMA 4/4x cabinets are ideal for specific purpose controls or as control gateways leading to control or data rooms (via cable or wireless connections).  These durably constructed, all weather units effectively protect equipment or instrumentation outside, or indoors when the threat of water damage (as with sprinkler systems) or other internal hazardous conditions may apply (for example, within manufacturing or processing plants). NEMA 4x enclosures further increases the level of equipment or instrumentation protection in locations where increased hazardous or caustic conditions exist.  NEMA 4/4x enclosures are available in a variety of model types and sizes for wall-mount, pole-mount and free-standing enclosures with one door. NEMA 4x enclosures are finished with 304 stainless-steel and are available in 316 stainless-steel for specialized orders. Inventronics has been manufacturing quality cabinets that look good, are completely functional and last. Sturdy, durable and meticulously designed, OEMs and System Integrators enjoy the ease by which their electronics and controls interface with the Inventronics cabinets. The customer benefits from comprehensive protection with effortless access to their instrumentation / electronics.