New HARTING Slim, EasyCon Connectors Serve Rail Industry’s Need for More Flexibility

Harting

March 26, 2018

HARTING, a leading supplier of connectivity solutions for the rail industry, has expanded its rugged Han HPR connector series for harsh environments with more options to help manufacturers of rolling stock assemble the increasingly complex electrical systems of modern equipment. The new Han HPR 22 Slim connector can accommodate up to four 250A contacts, yet its flat profile is ideal for height-restricted spaces like the underside of a rail car and its ultra-slim profile leaves room in wiring pathways for other critical systems. Its design was optimized in conjunction with a Viennese customer that needed a connector to fit a roughly eight centimeter gap between a tram body and bogie.

HARTING also has added new sizes 16 and 34 to the Han HPR EasyCon line that was launched originally with size 24. EasyCon stands for easy to connect. The two-part hood and mounting housing is ready to be screwed together in a few quick, simple steps, with ample space inside for cables for car-to-car or motor connections, making it easier on installers working right on the equipment.

The dimensionally optimized EasyCon connectors also offer more high current carrying capacity and configuration possibilities than standard Han® HPR interfaces. The size 16 can house 2-4 high current contacts (up to 2 x 650A), suitable for connecting compressors, single wheel drives, and ventilation systems. It also can be configured as a hybrid with power, signal or data modules from HARTING’s Han-Modular® lineup, with over 100 inserts to choose from. The size 34 comes in a straight version for traction motor connections and angled version for car-to-car jumper connections. They can accommodate up to four 650A contacts each and as a hybrid can house up to 12 Han-Modular inserts. 

http://www.harting.ca/industrial-connectors/markets-applications/transportation/

Related Articles

Endress+Hauser’s new generation of glass-free pH sensors deliver improved CIP stability

Endress+Hauser’s new generation of glass-free pH sensors deliver improved CIP stability

Endress+Hauser’s new generation of ISFET sensors made with unbreakable PEEK raises the performance bar in glass-free pH measurement. With their new design, these ISFET sensors ­– Memosens CPS47D, CPS77D and CPS97D – offer consistent accuracy, maximum product safety, and much improved clean in place (CIP) stability – up to six times greater CIP stability than the previous generation of ISFET sensors. They are built to perform reliably through at least 25 CIP cycles.

 

 

 

Phoenix Contact: Combi Plug-in Terminal Blocks with System

Phoenix Contact: Combi Plug-in Terminal Blocks with System

The Combi plug-in terminal blocks from Phoenix Contact have a standardized plug-in zone. They therefore offer simple, time-saving wiring. New for the proven, uniform plug-in zone are the LP Combi connectors with lever Push-in Technology for the easy integration of preassembled conductors. Different conductor types with and without ferrules can be connected. The lever Push-in Technology enables easy and effortless one-handed connector operation. Thanks to the versatile locking accessories, the contact system can withstand even strong vibration levels.

Changing Scene

  • François Tellier Appointed as East Managing Partner of EY Canada

    François Tellier Appointed as East Managing Partner of EY Canada

    EY Canada is pleased to announce the appointment of François Tellier as the new Managing Partner of Eastern Canada and the Office Managing Partner for Montréal. Tellier takes the reigns from Anne-Marie Hubert who will be retiring effective July 1, 2024. “We’re confident that François’ leadership, experience and strategic vision will further strengthen our presence… Read More…

  • True North Solutions Promotes Amanda Reitenbach to Director of Project Services

    True North Solutions Promotes Amanda Reitenbach to Director of Project Services

    Recently, True North Solutions was proud to announce Amanda Reitenbach’s promotion to the position of Director of Project Services. In this role, Amanda will be responsible for leading, guiding, and coaching program managers and project managers. She will oversee True North’s Project Management Office (PMO), project planning, executions, and resource allocation; facilitate stakeholder communication and… Read More…

Sponsored Content
The Easy Way to the Industrial IoT

The way to the Industrial IoT does not have to be complicated. Whether access to valuable data is required or new, data-driven services are to be generated, Weidmuller enables its customers to go from data to value the easy way. Weidmuller’s comprehensive and cutting-edge IIoT portfolio applies to greenfield and brownfield applications. Weidmuller offers components and solutions from data acquisition, data pre-processing, data communication and data analysis.

Visit Weidmuller’s Industrial IoT Portfolio.

ADVANCED Motion Controls Takes Servo Drives to New Heights (and Depths) with FlexPro Extended Environment Product Line

Advanced Motion Controls is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions.

Read More

Service Wire Co. Announces New Titles for Key Executives

Bruce Kesler and Mark Gatewood have been given new titles and responsibilities for Service Wire Co.

Bruce Kesler has assumed the role of Senior Director – Business Development. Bruce will be responsible for Service Wire’s largest strategic accounts and our growing Strategic Accounts Team.

Mark Gatewood has been promoted to the role of Vice President – Sales & Marketing. In this role, Gatewood will lead the efforts of Service Wire Company’s entire sales and marketing organization in all market verticals.

Read More

Tri-Mach Announces the Purchase of an Additional 45,000 sq ft. Facility

Tri-Mach Elmira Facility

Recently, Tri-Mach Inc. was thrilled to announce the addition of a new 45,000 sq ft. facility. Located at 285 Union St., Elmira, ON, this facility expands Tri-Mach’s capabilities, allowing them to better serve the growing needs of their customers.

Positioning for growth, this additional facility will allow Tri-Mach to continue taking on large-scale projects, enhance product performance testing, and provide equipment storage for their customers. The building will also be the new home to their Skilled Trades Centre of Excellence.

Read More

JMP Parent Company, CONVERGIX Acquires AGR Automation, Expanding Global Reach

Convergix Automation Solutions has completed the acquisition of AGR Automation (“AGR”), a UK-based provider of custom, high-performance automation design and systems integration primarily to the life sciences industry.

Following Convergix’s acquisitions of JMP Solutions in August 2021 and Classic Design in February 2022, AGR marks the third investment in Crestview’s strategy to build Convergix into a diversified automation solutions provider targeting the global $500+ billion market, with a particular focus on the $70 billion global systems integration and connectivity segments. Financial terms of the transaction were not disclosed.

Read More

Latest Articles

  • Omron’ Advanced Safety Services 101

    Omron’ Advanced Safety Services 101

    In any industrial setting, safety is of the utmost importance. Omron offers Advanced Safety Services to help you and your staff navigate the challenges of complex industry standards and compliance regulations. They also can provide machine safety technology to protect your people and equipment while maximizing productivity. Did you know that Omron’s safety training and… Read More…

  • Become a More Sustainable Industrial Organization

    Become a More Sustainable Industrial Organization

    If you’re looking for ways to become a more sustainable industrial organization this year, 98% of manufacturers are thinking the same thing. They are working towards implementing sustainability systems and solutions in their own organizations. As you work towards becoming a more sustainable industrial organization, you’re probably preparing for new mandates that regulatory bodies will… Read More…